Bedienungsanleitung Rotel rdv 1093 (Seite 25 von 30) (Englisch)

139019

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

English

Audio Setup Menu

DVD playback

system setup

video setup

high def. setup

audio setup

speaker setup

parental control

exit menu

digital audio output

compression

The Audio Setup menu provides two settings:

the format of digital audio output and a

compression mode optimizing Dolby Digital

playback for quiet listening.

Digital Audio Output

There are two options for the digital audio

output of the RDV-1093. The ﬁrst option is

Multichannel digital output that sends a mul

tichannel (Dolby Digital 5.1, DTS 5.1, etc.)

signal to the surround processor for decoding.

The other option is Stereo Output that sends a

downmixed two-channel digital signal.

• Multichannel: This setting allows a

full multichannel digital signal from the

RDV-1093 (default). Use this setting with

a Dolby Digital or DTS surround sound

processor. Note that you can still select

2-channel audio from the DVD’s menus.

• Stereo: This setting forces the RDV-1093

to downmix audio to 2-channel stereo for

output at the digital audio outputs. Use this

setting when connecting directly to the TV

monitor or to a 2-channel audio system.

Compression

Dolby Digital recordings are capable of wide

dynamic range (the difference between the

softest and loudest sounds). In some cases, this

may tax the audio system. In other cases, you

may want to reduce the dynamic range when

listening at low volume levels so that dialog is

loud enough to hear while preventing sound

effects and other dynamic passages from

being too loud.

This setting has no impact on the digital output

of the RDV-1093. It only changes the dynamic

range of the analog signal from the left/right

RCA audio outputs.

• OFF: full dynamic range; no compression

(default).

• 1–5: Five settings reducing dynamic range

for use with less capable audio systems (such

as TV monitor speakers) or late night listen

ing. The 1 setting is very mild compression.

The 5 setting is maximum compression.

NOTE: The compression feature only affects

Dolby Digital signals.

Speaker Setup Menu

DVD playback

system setup

video setup

high def. setup

audio setup

speaker setup

parental control

exit menu

speaker size

distance units

speaker distance

The Speaker Setup menu provides three setup

items relating to surround sound and bass

management of the audio signals at the analog

outputs of the RDV-1093.

NOTE:

These settings apply only to audio

signals at the analog outputs. They have no

effect on the digital audio output of the

RDV-1093. In addition, these settings only

apply to Dolby Digital and DTS decoding.

Many of the settings on this screen conﬁgure

the number and type of speakers in the system.

Specifically, there are LARGE and SMALL

settings that determine whether deep bass is

reproduced by the speaker connected to a

channel or redirected to a powered subwoofer.

The LARGE setting is “full-range”; the speaker

will reproduce the entire signal including deep

bass recorded in its channel. The SMALL set

ting is “high-pass”; the speaker will reproduce

only frequencies above the crossover point

(100Hz). Bass below the crossover will be

routed to a powered subwoofer connected to

the RDV-1093.

In addition, there are settings for delaying the

signal to the center or surround speakers.

Speaker Size

Use this item to conﬁgure speaker settings each

speaker in the system for the analog audio

outputs. Use the CURSOR

t/u buttons to select

the speaker you wish to set: Front, Center, Sur

round, or Subwoofer. Then, use the CURSOR

p/q buttons to choose a setting. Press the ENT

button to conﬁrm the setting. You can cancel

the menu without any changes by pressing the

RESUME button on the remote.

The options for the Subwoofer are:

• YES: Use this setting if a subwoofer is con

nected to your system. The subwoofer output

will carry LFE channel signals from Dolby

Digital and DTS 5.1 channel DVD-V discs

and redirected bass from other channels

configured as SMALL.

• NO: If your system does not have a sub

woofer, use this setting.

The options for the other speakers (Front,

Center, Surround) are:

• LARGE: This setting sends full-range audio,

including low bass, to the front speakers.

Use with large, full-range speakers when

subwoofer is set to NO.

• SMALL: A high-pass setting that redirects

low bass away from these speakers to a

subwoofer. Use with small bookshelf speak

ers when subwoofer is set to YES.

• NONE: Use when there is no speaker for

that position, for example, when there is

no center channel speaker.

NOTES: There is no SMALL option for the

front speakers in a system with no subwoofer.

When a Center, Surround or Subwoofer

is set to None, the sound for that channel is

added to the front speaker channels.

Distance Units

The following item requires measuring the

distance from each speaker to the listening

position. Use the Distance Unit item to specify

feet or meters as the unit of distance.

• FEET:

Specify distance in feet (default).

• METERS:

Specify distance in meters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1093 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info