Bedienungsanleitung Rotel RMB-1512 (Seite 7 von 11) (Englisch)

489974

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

English

Getting Started

Thank you for purchasing the Rotel RMB-1512 Twelve Channel Power

Ampliﬁer. When used in a high-quality music or home theater system,

your Rotel ampliﬁer will provide years of musical enjoyment.

The RMB-1512 is a high-power, twelve-channel power ampliﬁer,

providing the highest level of audio performance. A massive power

supply, premium components, and Rotel’s Balanced Design ensure

superb sound quality. High current capability allows the RMB-1512 to

drive the most demanding loudspeakers.

Features

• Twelve-channel power ampliﬁer, with 100 watts per channel

ouput into 8ohm

• Front panel input level control

• User-selectable power on/off conﬁguration: manual, automatic

signal sensing, or controlled by remote 12 volt trigger signal.

• Protection circuitry against fault conditions with front panel

indicators.

• Input linking, input mono switch and signal output link connectors

for maximum system conﬁguration ﬂexibility.

A Few Precautions

Please read this manual carefully. In addition to basic installation and

operating instructions, it provides valuable information on various

RMB-1512 system conﬁgurations as well as general information that

will help you get optimum performance from your system. Please

contact your authorized Rotel dealer for answers to any questions you

might have. In addition, all of us at Rotel welcome your questions and

comments

Save the RMB-1512 shipping carton and all enclosed packing

material for future use. Shipping or moving the RMB-1512 in anything

other than the original packing material may result in severe damage

to your ampliﬁer.

Fill out and send in the owner’s registration card packed with the

RMB-1512. Also be sure to keep the original sales receipt. It is your

best record of the date of purchase, which you will need in the event

warranty service is ever required.

Placement

Place the RMB-1512 on a solid, level surface away from sunlight,

heat, moisture, or vibration.

Don’t stack other components or objects on top of the RMB-1512.

Don’t let andy liquid fall into the unit.

Likewise, remember the weight of the ampliﬁer when you select an

installation location. Make sure that the shelf or cabinet can support its

considerable bulk.

The RMB-1512 generates heat during normal operation. Do not

block ventilation openings. Allow a minimum of 10 cm or 4 inches of

unobstructed space around the unit. If installed in a cabinet, make sure

that there is adequate ventilation.

AC Power and Control

AC Power Input

Your RMB-1512 is conﬁgured at the factory for the proper AC line

voltage in the country where you purchased it (USA: 120 volts/60

Hz, Europe: 230 volts/50 Hz). The AC line conﬁguration is noted on

a label on the back panel. The RMB-1512 must be connected to a

polarized 3-pin wall outlet.

The RMB-1512 is supplied with the proper AC power cord. Use only

this cord or an exact equivalent. Do not modify the supplied cord. Do

not use an extension cord.

Be sure the power switch on the front panel of the RMB-1512 is turned

off. Then, plug one end of the cord into the AC power connector on

the back panel of the ampliﬁer. Plug the other end into an appropriate

AC outlet.

If you are going to be away from home for an extended period of

time, it is a sensible precaution to unplug your ampliﬁer.

Power Switch and Indicator Light

The power switch is located on the left side of the front panel. To turn

the ampliﬁer on (or to activate either of the optional automatic power-

on modes), push the switch in.

The indicator light around the switch will light, indicating that the

ampliﬁer is turned on. To turn the ampliﬁer off, push the button again

and return it to the out position.

Auto Turn On/Off Mode Selector

The RMB-1512 provides three different options for manual or

automatic power on/off operation. These modes are selectable using

a three-position slide switch on the back panel as follows:

• With the switch in the OFF position, the ampliﬁer is turned

on or off manually using the front panel power switch. Also use

this mode if you are using a switched AC outlet to control power

to the ampliﬁer.

• With the switch in the SIGNAL SENSE POSITION, the

ampliﬁer turns on automatically when a signal is detected at the

inputs. The ampliﬁer will go into standby mode several minutes

after no signal is no longer present. The front panel power switch

overrides this function. It must be ON for the signal sensing

to work. Turning the switch OFF cuts power to the ampliﬁer,

regardless of whether or not a signal is present.

• With the switch in the 12V TRIG position, the ampliﬁer is

turned on automatically when a 12 volt trigger signal is present

at the 12V TRIG input to the left of the switch. The ampliﬁer goes

into standby mode if the +12 volt signal is not present. The front

panel POWER SWITCH overrides this function. It must be ON

for the +12V trigger to work. Turning the switch OFF cuts power

to the ampliﬁer, regardless of whether or not a trigger signal is

present.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel RMB-1512 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info