Bedienungsanleitung Rotel rt 02 (Seite 2 von 11) (Englisch)

161420

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT. INSERT FULLY.

APPLICABLE FOR USA, CANADA OR WHERE

APPROVED FOR THE USAGE

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU AU FOND.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RT-02 AM/FM Stereo Tuner

Important Safety Instructions

WARNING: There are no user serviceable parts inside. Re-

fer all servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not

expose the unit to moisture or water. Do not allow foreign

objects to get into the enclosure. If the unit is exposed to moisture,

or a foreign object gets into the enclosure, immediately dis-

connect the power cord from the wall. Take the unit to a qualified

service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the

product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance around the

unit. Do not place the unit on a bed, sofa, rug, or similar surface that could

block the ventilation slots. If the component is placed in a bookcase or

cabinet, there must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any

other appliance that produces heat.

The unit must be connected to a power supply only of the type and volt-

age specified on the rear panel of the unit.

Connect the component to the power outlet only with the supplied power

supply cable or an exact equivalent. Do not modify the supplied cable in

any way. Do not attempt to defeat grounding and/or polarization provi-

sions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at

severe angles, exposed to heat, or damaged in any way. The power cord

should be unplugged from the wall outlet if the unit is to be left unused for

a long period of time.

Immediately stop using the component and have it inspected and/or ser-

viced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to support its weight.

Do not place it on a moveable cart that could tip over.

NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or an-

tenna installer’s attention to Article 820-40 of the NEC. This provides guide-

lines for proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close to the

point of cable entry as practical. See installation diagram.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against interference

in a residential installation. This equipment generates and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause interference to radio or TV communications. There

is no guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause interference to radio or television re-

ception, which can determined by turning the equipment off and on, try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the unit and the television tuner.

• Connect the unit to an AC power outlet on a different electrical circuit.

• Consult your authorized Rotel retailer for assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rt 02 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info