Bedienungsanleitung Rotwild 2014 (Seite 48 von 52) (Deutsch, Englisch)

656106

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

47ROTWILD USER MANUAL | 2014

components. Any maintenance, adjustments or

dismantling of the forks/shocks should only be

carried out by an experienced bicycle mechanic.

• Make sure that your suspension forks and

rear suspension always have clean sliding

tubes.

• Clean your forks and the rear shock with a

soft sponge and clear water after every ride.

• After cleaning and drying, apply a very thin

layer of resin and acid free lubricant to the

sliding surfaces. Suitable oils (e.g. Teflon

sprays) are available from most qualified

professional bicycle workshops.

Pedals

Check regularly that the pedals are securely

attached to the cranks. Please remember that

left and right pedals have different threads.

Crank and bottom bracket bearings

The bottom bracket installed in your ROTWILD

bike is a completely closed system with sealed

industrial standard bearings. This means that

exterior maintenance and care are not required.

You need only check if the crank is securely

mounted and the bearings are running smoothly

and without any noises. If the bottom bracket

shows signs of play, please take your bike to a

qualified professional workshop.

Wheels

Check your rims for splitting and round running.

Check the tension of your spokes regularly, they

may become loose under constantly changing

stresses.

Potential accident risk

Broken spokes and diametrically opposite

spokes must be replaced immediately. After

replacement, the front/rear wheel must be re-

centred by a qualified professional workshop.

Chain

Have the wear on your chain checked at regular

intervals by a qualified professional workshop,

at least every 1000 km. ROTWILD recommends

that you consult an approved ROTWILD dealer.

Lubricate the chain regularly, at least every 300

km.

Do not soak your chain in cleaning solu-

tions, and do not use chain cleaning devices, as

these will remove the lubricants from the chain

rollers.

Be environmentally aware – use only

biodegradable lubricants. Lubricate the chain

with an appropriate chain lubricant. Run the

chain backwards with a few turns of the crank

and wipe excess lubricant from the chain with a

dry, lint-free cloth.

Wear and replacement

• Regularly check the wear on your chain.

Accurate measuring tools are available to

perform a precise check.

• Because the chain is an endless construction

with no connector link, chain replacement

should only be carried out by an experienced

bicycle mechanic with the appropriate special

riveting equipment.

• An incorrectly riveted chain may break and

cause a fall or accident. Please contact a

qualified professional workshop for chain

replacement.

Brakes and brake pads

Check the brake cables of your ROTWILD bike

for damage or other irregularities at regular in-

tervals. The thickness of the brake pads should

also be checked regularly and after continuous

hard use.

BICYCLE CARE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotwild 2014 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info