Bedienungsanleitung Rotwild Road 2015 (Seite 45 von 50) (Deutsch, Englisch)

656097

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

ROTWILD USER MANUAL

WHEELS

The basic components of the wheels

of your ROTWILD bike are the hub, the

spokes and the rim. The hub contains the

quick-releases with which your wheels are

attached to the frame. The inside of the

rim contains the rim tape that prevents

the sensitive inner tube inside the tyre

coming into contact with the sharp-edged

spoke nipples. When mounting a new

tyre, please make sure you have the right

dimensions (size and width).

Tips concerning air pressure

• Your wheels will only function perfect-

ly when the tyres are inated to the

recommended pressure. This is usually

printed on the walls of the tyres.

• A slight improvement in cycling comfort

is possible if you reduce the recom-

mended tyre pressure by 10-25%.

• Always make sure there is enough air in

your tyres. Only in this way can you be

certain that the inner tube will not be

pinched (Snake Bite) when riding over

sharp edged obstacles.

• If you inate your tyres at a lling

station, please take care to inate your

tyres in short bursts of air and constant

checking of the manometer reading.

These tyre pumps provide high ination

pressure that could over pressure and

burst your bike tyres.

• Use a so-called oor pump to pump up

your tyres at home. With this type of

pump, it is perfectly simple to ensure

the appropriate air pressure in your

tyres. You can check the pressure with

a manometer.

• Always take a hand pump along on

every ride to reinate your tyres to the

correct pressure in the case of a punc-

ture or loss of air.

Air pressure

Never pump up your tyres to a pressure

higher than the maximum permissible

pressure. This could cause tyres to burst

or slip o the rims while cycling.

Note

If it should become necessary to remove

the wheels for transportation, please take

care not to bend the brake disc located

on the left hand side of the wheel. A bent

disc can lead to uneven rotation in the

calliper and abrasion.

When transporting the bicycle with the

wheels removed a transport safety device

provided for the purpose should be

inserted between the brake pads. This is

to prevent the brake pads from moving

towards each other.

Air pressure units

As a rule, air pressure is given in Bar or

the English units PSI – see conversion

table.

PSI BAR

20 1,4

30 2,1

40 2,8

50 3,5

60 4,1

Mounting and removing wheels

If you have to remove a tyre to repair a

puncture, or if you are preparing your

ROTWILD bike for transport, it may be-

come necessary to remove one or both of

the wheels and remount them later.

Note

Please note, the disc brakes become ex-

tremely hot during braking. Let the discs

cool for a while if you intend removing

the wheels shortly after braking.

Removing wheels

• Open the quick-releases.

• As the forks have a drop-out protection

DETAILED OPERATING INSTRUCTIONS  WHEELS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotwild Road 2015 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info