Bedienungsanleitung Rowenta DG8409F0 PRO PRECISION (Seite 34 von 92) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

668356

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

1 • What water to use ?

Tap water :

Rowenta irons are designed to be used

with REGULAR UNTREATED TAP

WATER. If your water is very hard,

Rowenta recommends mixing half tap

water with half distilled water which

reduces the hardness.

Softened water :

There are many types of household

water softeners and the water from some

of them may be perfectly acceptable for

use in the steam generator. However,

some types of softeners, particularly

those that use chemicals such as salt,

can cause the appliance to leak or spit

during use, this is notably the case with

filtering jugs. Therefore we would not

recommend using this type of water.

If you experience this type of problem,

we recommend that you try using

untreated tap water or store-bought

distilled water which can be mixed 50%

distilled with 50% untreated tap water.

Once you have changed water it will take

several uses to correct the problem.

Rowenta recommends trying the steam

function for the first time on an old towel

or cloth that can be discarded to avoid

potentially damaging your clothes.

Always remember :

Heat concentrates the elements in water

during evaporation. The types of water

listed below may contain organic waste,

mineral or chemical elements that can

cause spitting, brown staining or

premature wear of the appliance: water

from clothes dryers, scented or softened

water, water from refrigerators, batteries,

air conditioners, rain water, boiled,

filtered or bottled water. These types of

water should not be used in your

ROWENTA iron.

2 • Preparing your steam

generator

Place the steam generator on a flat,

stable, horizontal and heat-resistant

surface.

Check that your appliance is unplugged.

Take the water jug and fill it with a

maximum of a litre of water and pour the

water into the water tank without

exceeding the Max level - fig.1.

Unwind the electrical power cord

completely and remove the steam cord

from its housing - fig.2.

Ironing Boards:

Due to the powerful steam output, a

mesh type ironing board must be used

to allow any excess steam to escape and

to avoid steam venting sideways.

PREPARATION _________________________________________

DESCRIPTION _________________________________________

1. Iron handle

2. Steam control button

3. Temperature control dial for iron

soleplate

4. Iron rest

5. Fixed 1 litre water tank

6. Boiler rinse cap or scale collector

cover (depending on model)

7. Power cord

8. Electric cord storage (Velcro)

9. Iron temperature control light

10. Iron positioning system

11. Steam cord

12. Steam cord storage clip

13. Scale collector (depending on the

model)

14. Control panel

a. “Restart” button

b1. “Boiler rinse” light

b2. “Calc-Away System”

indicator”

c. “Steam ready” light

d. ”Water tank empty” light

15. ON/OFF switch

PLEASE REFER TO SAFETY INSTRUCTIONS AT THE BEGINNING OF THIS

BOOKLET BEFORE USING YOUR APPLIANCE.

1800128865_DG84XX_GRH_110x154mm 14/02/13 16:08 Page28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta DG8409F0 PRO PRECISION Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info