Bedienungsanleitung Rowenta DG8855 (Seite 7 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

739562

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

3 • Switching on your steam

generator

Press on the on / off switch - fig.4, it

begins flashing. The green light (located

on the control panel) flashes and the

boiler heats up.

When starting, and regularly while it is

being used, your steam generator's

electric pump injects water into the boiler.

It makes a noise but this is quite normal.

The steam generator and the iron are

ready for use when the steam indicator

light is on and the iron light goes out.

4 •

Operating the control panel

• Flashing green light - fig.6 : the water is

heating up in the boiler.

• Continuous green light

- fig.7 : steam is

ready for use.

• Continuous red light

- fig.11 : the water

tank is empty.

• The “Calc-Away System” orange

indicator flashes

- fig. 13 : the collector

needs to be rinsed.

5 •

Using your steam generator

Place the iron’s temperature control -

fig.5

to the type of fabric to be ironed and

set the steam output

- fig.6 - see table

below. The iron temperature control light

turns on.

While ironing, the light on top of the iron

and the steam ready light turn on and

off, as the temperature adjusts without

interrupting ironing. To obtain steam,

press on the steam control button

beneath the iron handle and keep it

pressed

- fig.8. The steam will stop when

you release the button.

Always spray starch on the reverse side

of the fabric to be ironed.

The first time the appliance is used,

there may be some fumes and smell but

this is not harmful. They will not affect

use and will disappear quickly.

USE

YPE OF

FABRIC

ETTING

TEMPERATURE CONTROL

ETTING STEAM

CONTROL

COTTON /

INEN

•••

ILK

/ W

OOL

••

YNTHETICS

(Polyester, Acetate,

Acrylic, Polyamide)

•

Recommendations: To prime the

steam circuit, either before using the

iron for the first time, or if you have

not used the steam function for a few

minutes, press the steam control

button several times in a row - fig.8,

holding the iron away from your

clothes. This will enable any cold

water to be removed from the steam

circuit.

Iron temperature control setting: Start

with fabrics to be ironed at a low

temperature and finish with those

which need higher temperatures. Each

time you change fabrics, wait for the

light to turn off. Mixed fibre fabrics:

set the ironing temperature to the

setting for the most delicate fabric.

Woollen garments: press repeatedly

on the steam control button to obtain

short bursts of steam, without placing

the iron on the garment itself. This will

avoid making the fabric shiny. Steam

output control dial setting: Thick

fabric: increase the steam setting. At a

low temperature: set the steam output

control dial to the low position. For

delicate fabrics(•), press the steam

control button (under the handle of

the iron) intermittently to avoid

possible water droplets appearing

with the steam.

FerPRO_1800113725:FerClassic_PRO_110x154mm 28/11/08 12:39 Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta DG8855 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info