Bedienungsanleitung Rowenta DG8860 (Seite 9 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

544580

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

6. Use the steam turbo

Set the humid steam control to suit the

user (iron held with left hand or right

hand).

Press 2 or 3 times briefly on the turbo

steam control - fig. 9 to get an occasional

burst of steam iron for ironing heavy

fabrics, eliminating creases or for more

powerful vertical steaming.

7 • Vertical steam ironing

Set the iron temperature control and the

steam output control dial (located on the

control panel) to the maximum position.

Hang the garment on a coat hanger and

hold the fabric slightly taut with one

hand. Press repeatedly on the steam

- fig.8 control button (beneath the iron

handle) moving the iron from top to

bottom - fig.10.

Examples of how to use the vertical

steaming function:

• Removing creases directly on hangers

from delicate fabrics that you do not

want to bring into contact with the hot

iron.

• Refreshing a shirt or a suit just before

putting it on.

8 • Dry ironing

Do not press on the steam control

button.

9 • Fill the water tank again

When there is no more steam and

the”Water tank empty” light flashes -

fig.11 : water tank is empty .

Remove the water tank using the handle

(on the front of the steam generator) -

fig. 12 and fill it - fig. 1 do not fill above

the Max. level.

Push the water tank into position until it

"clicks" into place. Press the Restart

button underneath the control panel.

The steam generator and the iron are

ready for use when the steam indicator

light is on and the iron indicator goes

out.

10 • Storing the steam

generator

Press the illuminated on/off switch O/I

and unplug the generator. Place the iron

on the iron rest on the steam generator.

Fold the steam cord in two and place it in

its housing. Leave the steam generator

to cool for at least one hour before

putting it away if it is to be stored in a

ATTENTION! Use the steam turbo

function with great care because the

extraordinary power of the steam can

cause burns.

on the steam control button to obtain

short bursts of steam, without placing

the iron on the garment itself.

This will avoid making the fabric

shiny. Steam output control dial

setting: Thick fabric: increase the

steam setting. At a low temperature:

set the steam output control dial to

the low position. For delicate

fabrics(•), press the steam control

button (under the handle of the iron)

intermittently to avoid possible water

droplets appearing with the steam.

Do not place the iron on a metal

support. When taking a break from

ironing, always place the iron on the

iron rest plate of the unit. It is

equipped with non-slip pads and has

been designed to withstand high

temperatures.

As steam is very hot: never attempt to

remove creases from a garment while

it is being worn, always hang

garments on a coat hanger. For fabrics

other than linen or cotton, hold the

iron a few centimetres from the

garment to avoid burning the fabric.

If this occurs, remove the excess

water.

1800120550 DG88XX GRF Pro_110x154mm 07/12/10 16:56 Page5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta DG8860 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info