Bedienungsanleitung Rowenta DG9560 (Seite 7 von 10) (Englisch)

483576

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Remove the water tank (fig.2) and fill it up

(fig.16). Replace it fully into its housing (fig.4)

until there is a click.

Press the Restart button and the red indicator

light goes out; you can continue ironing.

8 • Dry ironing

Do not press the steam control button beneath

the iron handle. Do not press the “Precision

Steam Jet” button or humid steam button on the

iron handle

9 • Using damp steam

Press 2 or 3 times on the humid steam button to

obtain a more powerful, heavier burst of steam :

- for ironing thicker fabrics,

- to eliminate creases.

10 • Using the burst of

freshness function *

The burst of freshness function allows you to give

long-lasting freshness to your laundry.

Burst of freshness function : Move the selection

slide downwards (fig.17). Press the burst of

freshness button (fig.18) on the top of the iron

handle 2 or 3 times to obtain an intermittent jet of

freshness steam at the front of the iron.

11 • Replacing the capsule

Remove the capsule housing drawer by pulling it

out horizontally.

Remove the used capsule. Pull the red tab to

remove the seals on the refill capsule (fig.6).

Insert the capsule in its housing, pressing down

firmly until there is a “click” (fig.7).

Close the drawer again by pushing it in

horizontally until there is a closing “click” (

fig.8).

12 • Use the precision steam

jet function

The “Precision Steam Jet” function, allowing you

to iron the most hard-to-reach areas (such as

button holes, shirt cuffs and collars, darts in

trousers, the inside of jacket and coat sleeves) ;

soften the fibres before ironing, when the fabric is

very creased.

Precision steam jet function : Move the selection

slide Fresh off upwards (fig.19). Press the

“Precision Steam Jet” button (fig.20) on the top

of the iron handle 2 or 3 times to obtain short,

powerful bursts of steam at the front of the iron.

Then iron the fabric using steam to smooth the

fibres, by pressing the steam control button

beneath the iron handle.

USE IN CREASE REMOVAL

MODE

13 • Vertical steam ironing

The crease-removal brush makes it possible to

remove creases from certain materials that do not

crease much (viscose, polyester, etc.); to refresh

clothes that have already been worn; to add

finishing touches (removal of marks from

handling on the ironing board) and to eliminate

certain unpleasant odours.

Put the Ironing / Crease Removal selector to the

Crease Removal position (fig.21). The brush’s

indicator light switches on.

When using the brush for the first time, press the

steam control until steam appears.

Hang the garment on a hanger.

Pull the brush flex fully out of its housing (fig.22).

Set the steam flow button to the max position.

Wait until the green indicator light (located on the

control panel) remains steady.

If you have not used the brush for a few minutes,

press the steam function several times in a row,

away from your clothes. This will enable any cold

water to be removed from the steam circuit.

Hold the fabric with one hand, put the brush in

contact with the fabric to be treated and press the

steam control on the brush intermittently, moving

in a downwards direction (

fig.23).

CAUTION! In the intermediate position, the

green indicator light flashes rapidly : neither

the iron nor the brush functions.

Refill capsules are commercially available

under the reference: XD7000F0.

BE CAREFUL ! Use the humid steam function

very carefully because of the exceptional

power of steam that may cause burns.

IMPORTANT! Remove the needle and the

red cover from the capsule before inserting

it into the iron.

On first use, the fragrance may take a

moment to come through (approximately 10

seconds).

The fragrance capsule allows you to treat up

to 200 items of laundry at a rate of spraying

1 or 2 seconds per item.

Tip: for increased effectiveness, use the

fragrance at the end of ironing clothing or

household linen.

* depending on model

Notice Home pressing-UK-042453 20/06/06 17:38 Page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta DG9560 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Rowenta DG9560

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info