Bedienungsanleitung Rowenta DM8909 (Seite 4 von 32) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

613488

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

5DM 800 7Sprachig

7 Vertical steam jet

The iron can be used vertically. This is ideal for removing wrinkles from clothing

on hangers, curtains, wall tapestries, etc (treat polyacrylic fabrics with care).

Important!

Never steam or iron clothing that is being worn.

DRY IRONING

Push the variable steam control fully to the left (Position “min“).

AFTER IRONING

Unplug the iron. Set the variable steam control to max. and empty any water left in

tank. Then set the variable steam control to min. and leave the iron to cool down.

8 Iron with cord storage

■ For storage the supply cord can be wrapped around the integrated cord

storage feature once the iron has cooled off completely.

■ Always store the iron on its heel to protect the soleplate.

CLEANING AND MAINTENANCE

■ When necessary use a damp cloth to clean the cool iron, then wipe dry.

■ Read the information in POINTS TO NOTE.

Cleaning the soleplate

For the stainless steel soleplate we recommend the Rowenta soleplate cleaner

PC05. This is available from Rowenta dealers.

■ The high quality soleplate of your iron makes ironing easier and protects your

laundry. When not being used the iron should always be placed on its heel.

Do not rest it on a rough surface. Do not scratch or scrape the soleplate. Do

not use strong or abrasive detergents for cleaning.

9 Self-clean function

■ To clean the steam chamber it is advisable to activate the iron’s self-clean

function every two weeks. If the water in your area is very hard we recom-

mend weekly cleaning. To do this fill the tank to half and heat the iron on the

maximum temperature. Hold iron horizontally over the sink, push the steam

regulator slide beyond the max. position to “self clean“ and hold.

■ Initially a great deal of steam will be expelled. After a few seconds this is fol-

lowed by steam and water, which rinses dirt and scale particles out of the

steam chamber. Release the self-clean button after about 1 minute on position

min. Unplug the iron, allow it to cool off completely and wipe the soleplate

with a damp cloth. Plug in the iron again, allow it to heat up and hold it over

the sink for a moment to release steam.

■ The self-clean function helps prevent the drip opening in the steam chamber

from becoming blocked or affected by scale. Keep the function working well

by opening and closing the valve several times each time you have used the

iron (activate the steam control slide).

POINTS TO NOTE

■ If the iron has not been used for a long time (e.g. several weeks) the steam

channels should be cleaned and any deposits removed from the iron. To do

this, hold the iron horizontally before you start to use it and allow it to pro-

duce steam for about 1 minute. Also activate the shot of steam button several

times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta DM8909 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info