Bedienungsanleitung Rowenta DW9220 (Seite 10 von 29) (Deutsch, Englisch, Holländisch, Französisch)

667607

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

AFTER USE

10 • Emptying

Unplug the iron fig.2. Pour away remaining water fig.12.

Set the temperature control dial fig.3 on position Min. Set the iron on dry position .

11 • Storing

Allow the appliance to cool down before winding the cord around the heel. Store the iron

on its heel in a dry and safe place fig.14.

IMPORTANT Do not wind the cord around the hot soleplate. Never store your iron

placed down on the soleplate.

Remove the plug from the wall socket and let the iron cool down before

maintenance and cleaning.

14 • Self Clean (prolongs the life of the iron)

The Self Clean function flushes dirt and scale particles out of the steam chamber.

1. Fill the water tank with untreated tap water up to the max mark and heat the iron to the

••• temperature. Switch off the steam.

2. Unplug the iron and hold it over a sink horizontally.

3. Push the self clean button for 1 minute

fig.13a-13b and shake the iron gently: steam will

now begin to build up. After a few seconds water will emerge from the soleplate, rinsing

dirt and scale particles out of the steam chamber.

4. Plug in the iron and allow the iron to heat up again. Wait until the remaining water has

evaporated.

5. Unplug from the mains and allow the iron to fully cool down. When cool, the soleplate

can be wiped with a damp cloth.

13 • Cleaning the iron

When the appliance has cooled down, wipe the iron down with a damp cloth or sponge. A non

abrasive cleaning agent can be used.

Alternatively the ROWENTA cleaning kit ZD100 D1 can be used. After cleaning the soleplate, use

the Self Clean function to remove residues of the cleaner from the steam holes.

MAINTENANCE AND CLEANING

IMPORTANT Do not use sharp or abrasive cleaning agents or objects to clean the

soleplate and other parts of the iron.

WARNING : Do not use descaling agents even if advertised for steam irons. They will

permanently damage your iron.

TIP Use the Self Clean function approx. every 2 weeks. If the water is very hard,

clean the iron weekly.

(*) Depending on model

12 • Anti-scale system

Your iron contains an anti-scale cartridge to reduce scale deposits.

This considerably prolongs the operational life of your iron.

The anti-scale cartridge is an integral part of the water tank and does not need to be

replaced.

7 • Spray

Press the spray button to moisten difficult creases fig.10. You can use the spray function

at any temperature.

8 • Anti-Drip system *

It prevents water dripping out of the soleplate when the temperature is too low.

9 • Auto Off function*

• For your safety, the electronic system cuts off the power and the auto off indicator light

flashes fig.11 when:

- The iron remains motionless for more than 8 minutes on its heel

- The iron remains flat or on its side for more than 30 seconds

To restart the iron, just move it gently until the warning light stops flashing.

1103909885DW9220DW9225D1_110x220mm26/02/1308:57Page5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta DW9220 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info