802897

Rowenta DW9510 Steamforce Pro Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
6 7
EN
EN PROBLEMS
Problem Cause Solution
The iron is plugged in, but the
soleplate of the iron remains
cold.
No mains supply. Check that the mains plug
is properly inserted or try
plugging the iron into a
different socket.
The automatic electronic auto
off is active.
Move your iron.
None or too little steam is
being emitted.
The iron is not ready to use. Wait until the mode you have
selected stops blinking.
NB: on "Nylon" mode, the
steam output is low to
preserve your clothes.
Not enough water in the
water tank. Fill the water tank.
Anti-Drip is active Wait for the soleplate to reach
the correct temperature.
The trigger is not pressed. Press the trigger to get steam
output.
The steam is blocked on
NYLON mode in order to
protect your clothes
Select a higher mode if
needed
Brown streaks come through
the holes in the soleplate and
stain the fabric.
Residues in the steam
chamber or on the soleplate.
Use the Calc Clean Program
then clean your iron.
Do not add any descaling
agents, perfumed, or
scented additives to the
water in the water tank.
Use the Calc Clean Program
and clean your iron if you
have used the above.
Fabric fibres have
accumulated in the holes of
the soleplate and are burning.
Clean the soleplate with a
non-metallic sponge.
Your linen is not rinsed
sufficiently or you have
ironed a new garment before
washing it.
Ensure linen is rinsed
thoroughly.
Use of starch. Always spray starch onto the
reverse side of the fabric to
be ironed and clean your iron
soleplate afterwards.
Pure distilled /demineralised
or softened water is being
used.
Only use untreated tap water
or mix half tap water with half
distilled/demineralised water.
Use the Calc Clean Program
and clean your iron.
Iron is leaking. Overuse of shot of steam
trigger. Allow more time between
each shot.
Use of the shot of steam
trigger on NYLON, SILK or
WOOL modes.
Use only the steam boost on
COTTON and LINEN modes.
Use of chemical
descaling agents,
perfumed or scented
additives.
AFTER USE
8 • Emptying
Unplug the iron fig 1. Pour away remaining water fig 10.
9 • Storing
Allow the appliance to cool down for 1 hour before winding the cord around the heel. Store
the iron on its base in a dry and safe place fig 12.
IMPORTANT Do not wind the cord around the hot soleplate. Never store your iron
placed down on the soleplate.
Remove the plug from the wall socket and let the iron cool down before
maintenance and cleaning.
IMPORTANT: this program will last 4 to 6 minutes.
10 • Cleaning the iron
When the appliance has cooled down, wipe the iron down with a damp cloth or sponge. A non
abrasive cleaning agent can be used.
IMPORTANT Do not use sharp or abrasive cleaning agents or objects to clean the
soleplate and other parts of the iron.
WARNING : Do not use descaling agents even if advertised for steam irons. They will
permanently damage your iron.
MAINTENANCE AND CLEANING
11 • Calc clean program (4-6 min)
The Calc Clean System flushes dirt and scale particles out of the steam chamber.
This considerably prolongs the operational life of your iron.
Your iron needs to be cleaned when the CALC CLEAN warning light remains lighted on the
LED screen fig 11a.
If the "CALC CLEAN" light starts flashing when you are ironing, you can finish your ironing
session. There is no risk for your clothes nor the appliance.
TO START THE CALC CLEAN PROGRAM:
1. Unplug the iron (fig 1)
2. Fill in the water tank fig 2 & 3
3. Plug the iron (fig 4)
4. Put the iron over a sink or a basin
5. Press simultaneously the Mode button & the trigger for 3 secondes to start the Calc Clean
Program. (fig 11b)
The iron will start to heat up without producing steam. When arrived at the maximum
temperature, the water will start to run down fig 11c. During the process, the fabrics on the LED
screen will blink alternatively. Once the process finished, the iron will automatically shut off.
Allow the appliance to cool down and then wipe the iron down with a damp cloth or a sponge.
6 • Anti-Drip system
It prevents water dripping out of the soleplate when the temperature is too low.
7 • Auto Off function
• For your safety, the electronic system cuts off the power and the auto off indicator
light flashes fig 9 when:
- The iron remains motionless for more than 8 minutes on its base
- The iron remains flat or on its side for more than 30 seconds
To restart the iron, just move it gently until the warning light stops flashing.
… 6 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rowenta DW9510 Steamforce Pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info