Bedienungsanleitung Rowenta ES6400 (Seite 14 von 50) (Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

666701

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

ENG

Your machine is also compatible with

soft pods (generally 60 mm in diameter).

As this type of pod is not specifically des-

igned for espresso machines, you will

obtain a weaker espresso than with an

E.S.E. pod.

• Before removing the removable tank,

remember to place the selector d1 in the

position "0".

• Fill the tank with cold water and fit it back

onto the appliance (fig. 7 and 8).

• Switch on the appliance by pressing the

ON/OFF button d2.

• The LED flashes during preheating, then

remains lit.

The appliance is then ready for use.

For best results, we recommend warming up

the accessories beforehand (filter holder and

cups) without adding any ground coffee.

Proceed as follows:

• Fit the empty filter holder, and place the

espresso cups underneath it.

As soon as the appliance has reached the right

temperature, the orange LED stops flashing.

• Press the 2 cup or 1 cup button according to

what you require.

• Once the cup(s) are filled with hot water,

move the selector back to the "0" position

• Release the filter holder by pressing the

"EJECT" button lightly and turning it towards

the left (fig. 1). If required, remove the paper

around the pod following the dotted lines

(fig. 12). Place the E.S.E pod with the red

writing facing downwards (fold the corners of

the filter paper back). Ensure that the paper is

placed inside the filter, otherwise this could

cause leaks. For creamier and thicker froth,

the E.S.E pod must be positioned correctly.

The pod is designed to make one cup of

coffee. The use of 2 E.S.E pods on top of one

another is not recommended.

• Insert the filter holder into the appliance

tightening it by turning it towards the right as

far as possible (fig. 3).

• To prepare your espresso, follow the same

procedure as for the preparation of an

espresso with ground coffee.

With a soft pod

• Before removing the removable tank,

remember to place the selector d1 in the

position "0".

• Fill the tank with cold water and fit it back

onto the appliance

(fig. 7 and 8).

• Switch on the appliance by pressing the

ON/OFF button d2.

• The LED flashes during preheating, then

remains lit. The appliance is then ready for

use.

For best results, we recommend warming up

the accessories beforehand (filter holder and

cups) without adding any ground coffee.

Proceed as follows:

• Fit the empty filter holder, and place the

espresso cups underneath it. As soon as the

appliance has reached the right temperature,

the orange LED stops flashing.

• Press the 2 cup or 1 cup button according to

what you require.

• Once the cup(s) are filled with hot water,

move the selector back to the "0" position

• Release the filter holder by pressing the

"EJECT" button lightly and turning it towards

the left (fig. 1). Place a soft pod into the filter

holder. The pod is designed to make one cup

of coffee. The use of 2 pods on top of one

another is not recommended.

• Insert the filter holder into the appliance

tightening it by turning it towards the right

(fig. 3). The more it is compressed, the

stronger the espresso will be.

• To prepare your espresso, follow the same

procedure as for the preparation of an

espresso with ground coffee.

7. PREPARING THE STEAM

The steam is used to froth the milk (for example

when preparing cappuccinos or hot chocolate)

and heating water (for tea and other hot drinks).

• Turn the selector d1 to the position (fig. 13)

(to obtain more steam, the temperature needs

to be higher than when making coffee).

• The ON/OFF button LED flashes again then

remains lit. The appliance is then ready for

use.

• Place the liquid to be heated into a recipient.

For best results, we recommend pouring the

liquid to be heated or frothed into a recipient

with a narrow neck (a small jug for example).

• Plunge the steam nozzle into the liquid.

• Turn the selector d1 to the position (steam)

(fig. 14): the steam pours into the liquid.

ROWENTA 6400 - EO:0828113 8/07/08 11:36 Page 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta ES6400 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info