Bedienungsanleitung Rowenta HU5222 Aqua Perfect (Seite 9 von 34) (Englisch, Französisch, Spanisch)

763296

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

• WARM MIST function Button E: Heated mist for anti-bacterial and turbo effects:

Press button E to start or stop the “Warm Mist” function. On the screen, the red pictogram appears or

disappears. After 10 minutes of use, the mist becomes warm.

After 30 minutes of use on warm mist position, the anti-bacterial action starts and allows you to fight

the growth of germs* in the water base of the device. This function also comes as an extra to the

other operating modes and allows you to increase the humidity output by 20%. As soon as the level

of humidity of the room is lower, the warm mist re-starts (on the screen the red pictogram appears).

* Removes up to 91% of Escherichia Coli and Staphylococcus Aureus bacteria representing most of the bacteria

known to exist after 30 minutes of use on warm mist position - under normal conditions of use – tests carried out

by an independent laboratory.

• NIGHT function: On/Off Light & Sound: Button F.

Press button F to turn the function on or off.

This function allows you to switch off the light of the water tank as well as the beep sounds of touch-

button.

PLEASE NOTE: If night mode is activated the sound indicator for empty tank will not work. Only light

indicator N for empty tank (red picto) is blinking.

• APPLIANCE(S) WITH REMOTE CONTROL (HU523x) :

The remote control uses 1 x 3V button cell (CR2025) which is not included.

Place the batteries in their compartment making sure that you put them in with the positive and

negative ends the right way round as shown in the battery compartment.

IMPORTANT: You are advised to switch off and unplug the appliance when not in use. When storing

the appliance for a longer period of time, please remove the batteries from the remote control.

• EMPTY TANK INDICATOR: red light N and sound indicator

If the water level is too low or if the water tank is removed, the three beeps are activated along with the

red pictogram (N) blinking on the screen. If the water tank is not filled or replaced after 15 minutes,

the appliance will stop automatically. Fill the tank and replace the water tank on the base, the appliance

will work normally.

MAINTENANCE

IMPORTANT: this type of appliance requires regular and thorough maintenance. Like for any

humidifiers with stagnant water, we recommend to give the appliance a complete clean once a

week (depending on use) to avoid bacteria proliferation.

You must always switch off and unplug your appliance before undertaking any maintenance on it.

Never put the product base under tap water because of risk of water entrance by air outlet.

It is important to clean the water tank, the vaporization area (around the piezo disc, the heating element

and the piezo disc.) and the air inlet grids located under the appliance regularly.

Never use detergents or scouring products for cleaning your appliance.

Never immerse the base of the appliance, the power cord or plug in water or any other liquid.

We recommend to use cold boiled water or distilled water.

• Cleaning the tank:

1- Clean the tank and the tank stopper using soapy water and dry it with a soft dry rag.

2- To clean the inside of the tank, pour water into it and shake vigorously. Empty and dry with a soft

dry rag.

3- Make sure to pull out the water from appliance and dry it before you store it for a long period of

time.

• Cleaning the vaporization compartment (arround the piezo disc 13), the heating element and the

piezo disc.

Rinse regularly (every 3 days) the water base with fresh water and dry it with soft dry rag.

IMPORTANT : make sure that no water gets into the fan air outlet (16).

Regular cleaning of the piezo disc and heating element will avoid scaling. Do not use hard or abrasive

utensils, only use the brush provided with the device.

In case of scaling appearance, please refer to the paragraph «CLEANER AND DESCALER PROVIDED

WITH THE APPLIANCE».

WARNING : we recommend to give the heating element and the piezo disc a complete clean as

soon as scaling sediment appeared on them to preserve same level of performances.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta HU5222 Aqua Perfect Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info