Bedienungsanleitung Rowenta PU2530 PURE AIR ESSENTIAL (Seite 5 von 120) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

739627

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

WHERE TO INSTALL THE APPLIANCE

Place the purifier on a flat, stable surface in the room requiring treatment.

To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture

or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.

Recommended to be used in ambient conditions lower than 35°C 70%RH.

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Before the first use, ensure the voltage, frequency and power of your appliance suit your electric supply.

Your appliance can operate using an unearthed plug. It is a class II (double electrical insulation ).

Before switching on your appliance, ensure that:

- the appliance is completely assembled as described in the safety instructions,

- the appliance is placed on a stable, horizontal surface,

- the appliance is positioned in accordance with the instructions given in this manual,

- the air inlets and the oultet grid are completely unobstructed,

- the filters and panel have been correctly installed (See section "Disassembling / Reassembling filters")

IMPORTANT: You are advised to switch off and unplug the appliance when not in use.

OPERATION

• Power Switch (1)

– Turn the purier on or o.

• Speed selection (2)

– You can select 3 purication speeds as required.

– Low gear: in this mode, the purication wind speed is small, and the noise is low ,which is suitable

when sleep.

– Middle gear: in this mode, the purication wind speed is increased , which is suitable under the good

air condition.

– High gear: in this mode, the purication wind speed is the largest, which can quickly purify pollutants

in the air ,suitable for the environment with poor air quality, such as when some one smoking.

• Sleep mode (4)

– In this mode, press the sleep key to count into the sleep mode, the purication wind speed is in the sleep

gear. Press the sleep key again then exit the sleep mode and automatically restore to the working mode

before entering the sleep mode.

• Child lock (5)

– In working mode, press and hold the timer button (3) plus sleep mode button (4) at the same time for 3

seconds to enter the child lock mode. Press and hold the indicator light of child lock for 3 seconds then

exit the child lock.

– In child lock mode, other keys are invalid.

• Timer (3)

– When the purier is working, press the key to select the required working time(1,2,4,8 hours), and the

purier will stop working after reaching the set time automatically.

– When the purier is in standby mode, press the key to select the required scheduled working time

(1,2,4,8 hours).The purier will start working when reached the set time.

CARE AND MAINTENANCE

Before performing any maintenance work, switch off the air purifier using the on/off button (1).

Use a damp cloth to clean the surface of the product.

Important: Do not use any abrasive materials, as these may damage the surface of the product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta PU2530 PURE AIR ESSENTIAL Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info