762561
15
Zoom out
Zoom in
Vorherige Seite
1/158
Nächste Seite
11
EN
* According to model : this piece or accessory is specific to
certain models or can be bought separately.
REMOVE THE DUST TRAY (13)
Withdraw the tube (19) from the vacuum opening (10) - Fig.2.
Remove the dust tray (13) from its housing (7) : take the tray handle (13a) and remove the tray – fig. 14.
1. EMPTY THE DUST TRAY
Press on the opening lever (13c) – fig. 15a—and then remove the lid – fig. 15b.
Empty the tray over a bin – Fig. 16.
Make sure that no dust remains inside the tray.
Place the lid back: place the stops in their slots – fig. 17a – and close the lid – fig. 17b.
Replace the tray (13) in its compartment (7) – Fig. 18.
2. CLEANING THE BLACK FOAM FILTER (14A)
Pull simultaneously on the opening clips (13d) of the HEPA filter case - Fig.19.
Separate the black foam filter (14a) from the HEPA filter (14b) - Fig. 20.
Wash the black foam filter (14a) under the tap, squeeze it out like a sponge and leave to dry for 12 hours
- fig. 21.
Once the foam is completely dry, assemble the HEPA filter case (14): black foam filter (14a) and HEPA fil-
ter (14b) under the dust tray (13) – Fig. 22, then replace the dust tray inside its compartment (7) – Fig. 18.
3. CLEAN THE DUST TRAY (13) AND THE AIR/DUST SEPARATOR (15)
Press on the opening lever (13c) – fig. 15a—and then remove the lid – fig. 15b.
Empty the tray over a bin – Fig. 23.
Unlock the HEPA filter case (14) by simultaneously pulling on the opening clips (13d) located at either
end of the dust tray – Fig. 24.
Remove the HEPA filter case (14) – Fig. 25.
Turn the compartment over and place the accessory (18b) into the lock slot of the air/dust separator base
(17) - fig 26.
Open, making sure to turn in the proper sense for unlocking ( ) – Fig.27.
Remove the dust separator base (16) - Fig. 28.
Unclip then remove the air/dust separator (15) by turning it in the unlocking direction ( ) – Fig.29.
Then rinse the dust tray (13), the air/dust separator base (16) and the air/dust separator (15) with soapy
water – Fig. 30.
Dry them with a cloth – Fig. 31.
Once dry, replace then clip the air/dust separator (15) on the air/dust separator base (16), following the
right sense for locking ( ) – Fig.32.
Place them back on the dust tray (13) - fig 33.
Place the accessory (18b) into the lock slot of the air/dust separator base (16) - fig 34.
Close, making sure to turn in the proper sense for locking ( ) – Fig.35.
Clip the HEPA filter case (14) (black foam filter (14a) + HEPA filter (14b)) onto the tray – Fig. 36.
Replace the tray (13) in its compartment (7) – Fig. 18.
Important! To optimise the performance of your vacuum cleaner, make sure you clean the foam (14a)
each time you empty the dust tray (13).
Warning!
The black foam filter (14a) should only be put back into the appliance when it is completely dry. You
can use your vacuum cleaner while the black foam filter (14a) is drying by using the replacement
black foam filter (14abis).
Important: Clean the dust tray (13) and the dust separator (15) every month.
Important: Empty the dust tray (13) after each use.
Warning: remember to stand over a bin every time you clean the dust tray.
RO_ASPIRATEUR_CITY_SPACE_903359_903359/01 12/06/13 15:34 Page11
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rowenta RO2719 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info