Bedienungsanleitung Rowenta RO6279 (Seite 14 von 71) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

762736

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

CLEANING AND MAINTENANCE

* According to model : These parts are specific to certain

models or they are accessories that can be purchased se-

parately.

USE

1 • Assembling the different parts of

the appliance

• Place the tube in the vacuum opening (fig. 1) and turn

clockwise to lock. To withdraw the tube, turn in the opposite

direction and pull (Fig 2).

• Fit the telescopic metal tube to the end of the butt until you

hear a 'click' (Fig 3) (to dislodge it, press the screwing button

on the tube and pull)

• Fit the nozzle for all floor types (20 or 21)* to the end of the

telescopic metal tube (Fig 4)

• Adjust the telescopic metal tube to the desired length using

the telescopic system (Fig 5).

Fit the corresponding accessory to the end of the telescopic

metal tube or the butt:

- For rugs and carpets: use the multi-surface nozzle (20 or 21)

in the retracted brush position or the Turbobrush* (fibres

and animal hairs).

- For wood and hard floors: use the multi-surface nozzle (20 or

21) in the exterior brush position or, for best results, use the

parquet nozzle*.

- For corners and hidden spots: use the crevice nozzle*.

- For upholstery and delicate surfaces: use the upholstery

brush integrated to the ERGO COMFORT nozzle (EASY

BRUSH) or the upholstery nozzle*.

2 • Plugging the cord in and turning on

the appliance

Unwind the power cord completely, plug in your vacuum

cleaner (Fig 6) and press the ON/OFF pedal (Fig 7).

Note: you can use your vacuum cleaner in the horizontal

position (sleigh) but also in vertical position, especially when

vacuuming stairs or curtains.

Adjust the vacuuming power:

?with the electronic power control switch (Fig 8)

?with the mechanical power control on the butt: open the

regulation shutter slider to manually decrease the

vacuuming power and thus keep the nozzle from getting

stuck to the surface being vacuumed (fig.9) ex: sheer

curtains, fragile surfaces...

• (MIN) position for vacuuming delicate fabrics

(sheer curtains, textiles)

• (MID) position for daily vacuuming of all floor

types and in the event of weak dirt marks

• (MAX) position for vacuuming hard floors,

rugs and carpets in the event of strong dirt

marks

3 • Storage and transport of the

appliance

After use, switch off your vacuum cleaner by pressing the

ON/OFF pedal and unplug it (fig. 10). Rewind the power cord

by pressing the power cord rewind pedal (fig. 11). In vertical

position, place the nozzle in the parking position (fig.12). In

vertical position, place the nozzle in the parking position

(fig.13).

You will thus be able to transport and store your vacuum

cleaner in the parking position (fig.14).

WARNING: always switch off and disconnect your

vacuum cleaner before changing any accessories.

Never turn your vacuum cleaner on if the dust box

(12) and the filtration system (case) are not in place.

1 - Empty the dust box

• Withdraw the tube from the vacuum opening (Fig.2)

• Open the lid of your vacuum cleaner (fig.15).

• Remove the dust box (12) from its compartment by using

the handle (Fig.16).

• Lean on the opening button (OPEN) of the dust box lid and

then lift the lid (Fig.17) to withdraw it completely (Fig.18).

• Empty the dust box over a dustbin (Fig.19)

• Place the lid back on the box by putting the corresponding

parts on the appropriate notches (Fig.20), then pull it down

until you hear a 'CLICK' (Fig.21).

• Place the box back in its casing (Fig.22).

2 - Clean the dust box and the

filtration system

The air we breathe contains particles that can be allergenic:

larva and dust mite faeces, mould, pollen, smoke and animal

waste (hair, skin, saliva, urine). The finest particles can

penetrate deep inside the respiratory system or cause

inflammation, affecting the entire respiratory function.

IMPORTANT: Always turn off and disconnect your

vacuum cleaner before performing any

maintenance procedures.

IMPORTANT Empty the dust box after each use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta RO6279 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info