8
1 • Assembly of the parts of
the appliance
Clip the nozzle of the hose into the suction inlet
located on the front of the vacuum cleaner
(fig.1)
.
To remove it, unclip the nozzle and pull.
Attach the accessory clip to the power nozzle
(fig.2)
and fix the accessories to it
(fig.2)
.
Assemble the telescopic tube* or extension tubes*.
Adjust it to the desired length
(fig.3)
.
Fit the desired accessory to the end of the tube
(fig.4)
.
• For rugs and carpets: use the
nozzle
in the
retracted brush position or the turbobrush* –
(animal hair).
• For parquet and smooth floors: use the
nozzle
in
brush position or, for a better result, use the parquet
nozzle
*.
• For corners and areas which are difficult to reach:
us the crevice tool*.
• For furniture: use the upholstery nozzle*.
2 • Connecting the cord and
starting the appliance
Unwind the power cord completely, plug your
vacuum cleaner in and press the On / Off pedal
(fig.5).
Adjust the suction power with the mechanical
power regulator* on the power nozzle: open
the slider on the power nozzle to manually
reduce suction power, e.g.: on fragile
1 • Unpacking
Unpack your appliance, keep your warranty card
and read the instructions for use carefully before
using your appliance for the first time.
2 • Tips and precautions
Before each use, the cord should be unwound
completely. Make sure that it does not get stuck or
run against sharp edges.
If you are using an extension cord, make sure it is in
perfect condition and that it suitable for the power
of your vacuum cleaner. Never unplug the
appliance by pulling on the cord.
Do not move the vacuum cleaner by pulling on the
cord, the appliance must be moved by its carrying
handle. Do not use the cord or the flexible hose to
lift the appliance.
Stop and disconnect your vacuum cleaner after
each use. Always stop and unplug your vacuum
cleaner before maintenance or cleaning.
This appliance is not designed to be used by
people (including children) with a physical,
sensory or mental impairment, or people without
BEFORE USING FOR THE FIRST TIME
USE
ATTENTION Always stop and unplug
your vacuum cleaner before changing
accessories.
ATTENTION Never operate the
vacuum cleaner without the filtration
system (foam, microfilter and filter).
*Depending on model:
this is either equipment specific to certain models or available as an optional accessory.
EN
knowledge or experience, unless they are
supervised or given prior instructions concerning
the use of the appliance by someone responsible
for their safety.
Children must be supervised to ensure that they
do not play with the appliance.
Your vacuum cleaner is equipped with a protective
device that prevents the engine overheating. In
some cases (using the power nozzle on chairs,
seats...), the protective device is triggered and the
vacuum cleaner may emit an unusual noise which
is not at all serious.
Use only original Rowenta accessories and filters.
Make sure all the filters are in place.
Never operate the vacuum cleaner without the
filtration system (foam, microfilter and filter).
Never put the foam and the microfilter into the
vacuum cleaner before they are completely dry.
In the event that you find it difficult to obtain
accessories and filters for this vacuum cleaner,
contact the Rowenta customer service (see contact
information on the last page).
