Bedienungsanleitung Rowenta RO7853 (Seite 15 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

762571

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

1 • Unpacking

Unpack your appliance and remove any labels, keep your

warranty form and read the instructions carefully before

using your appliance for the first time.

2 • Recommendations and

precautions

Unwind the power cord completely before each use. Do not

jam it and do not allow it to rub against sharp edges.

If you are using an electrical extension, check that it is in

perfect condition and that it is suited to the power of your

vacuum cleaner. Do not unplug the appliance by pulling on

the power cord.

Do not move the vacuum cleaner by pulling on the power

cord, the appliance must be moved using its carrying

handle.

Do not use the power cord or the hose to lift the appliance.

Switch off and unplug your vacuum cleaner after each use.

Always switch off and unplug your vacuum cleaner before

maintenance or cleaning.

Your vacuum cleaner is fitted with a safety device which

prevents the motor from overheating. In certain cases (when

used on chairs, sofas, etc.) the safety device may be tripped

and the appliance may make an unusual noise that is not

serious.

Only use original Rowenta accessories and filters.

Check that all the filters are in place.

Do not operate your vacuum cleaner without the

filtration system fitted (foam, microfilter and filter).

Never place the foam and microfilter in the appliance unless

they are completely dry.

If you have any difficulties in finding accessories or filters for

this vacuum cleaner, contact the Rowenta Customer

Service.

BEFORE FIRST USE

1 • Fitting the elements onto the

appliance

Clip the end of the hose to the suction inlet located at the

front of the appliance (fig.1). To remove, unclip the end

using the clip and remove.

Fix the accessory support* to the notch in the parking

position located at the back of the vaccuum cleaner (fig.2)

and store the accessories on top.

• Fit the metal telescopic tube to the end of the nozzle until

you hear a click indicating that it is locked (fig.3). To remove,

press the tube lock button and remove.

• Fit the multi-surface nozzle (23) to the end of the metal

telescopic tube until you hear a click indicating that it is

locked (fig.4). To remove, press the nozzle lock button and

remove.

• Adjust the metal telescopic tube to the desired length

using the telescopic system (TELESCOPIC SYSTEM) (fig.5).

Fit the corresponding accessory to the end of the metal

telescopic tube or the nozzle:

- For rugs and carpets: use the multi-surface nozzle in the

retracted brush nozzle position or the Turbo-brush* (fibres

and animal hairs).

- For smooth surfaces and smooth surfaces with crevices

(such as tiled floors): use the all-surface nozzle (23) with

the brush extended or, for better results, use the smooth

surface nozzle* (28.a*) without the removable brush.

- For fragile surfaces, such as parquet, it is recommended

to use the standard parquet nozzle (27*) or the nozzle

with a line of bristles (28.b*)

- For corners and hard to reach spots: use the telescopic

crevice nozzle*.

- For upholstery and delicate surfaces: use the brush with

the nozzle (EASY BRUSH) or the upholstery nozzle*.

USE

IMPORTANT: always switch off and disconnect your

vacuum cleaner before changing the accessories.

ERGONOMIC RECOMMENDATIONS

ERGO COMFORT range

Ergonomic, the ERGO COMFORT range has been

designed to facilitate and improve user comfort

when vacuuming.

To prevent bending over and to ensure upright

posture, make sure to:

1. Adjust the length of the ERGO COMFORT metal

telescopic tube to your body (fig.6).

2. Place your second hand on the front of the ERGO

COMFORT nozzle handle (fig.7).

* According to model: these systems are specific to certain mo-

dels or are accessories available as an option.

IMPORTANT! If the accessory support* is positioned

at the rear of the appliance, you must remove it so

that the vacuum cleaner’s lid (1) can be opened.

IMPORTANT: The nozzle for smooth surface with

crevices 28.a* is used to measure performance

associated to the energy label. This nozzle allows

you to optimise the dust-collection performance of

your appliance on smooth surfaces with crevices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta RO7853 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info