Bedienungsanleitung Rowenta RO8033 (Seite 14 von 101) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

762704

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

2 • If you have the automatic

model*: automatic cleaning of

the HEPA filter and emptying of

the dust container

Cleaning is performed automatically and requires

no action from you. It is carried out when required

when your vacuum cleaner is switched on or off.

NOTE: Your vacuum cleaner makes a clicking

noise during the cleaning operation, this is

completely normal (fig.21).

We recommend that you empty the dust container

each time after use and/or after cleaning the filter.

Proceed as follows:

- Unplug your vacuum cleaner and open the cover

by pressing the "OPEN" button (fig.18) and

remove the bowl (fig.19).

- Remove the filter assembly composed of the

separator and the filter (3 and 5) (fig.22) tapping

it gently against the side of the bowl to remove

any excess dust (fig.23) then empty the dust

container (fig.24).

- Clean the separator cover using a cloth is if it is

dirty (fig.25).

- Refit the filter assembly (3 and 5) inside the dust

container (fig.26). Then refit the dust container

into its housing and close the cover of the vacuum

cleaner (fig.27).

3 • Servicing the HEPA filter

IMPORTANT Empty the dust container

afterwards.

IMPORTANT The suction power may still

remain unsatisfactory after the mechanical or

automatic cleaning of the HEPA filter

(see Cleaning and maintenance paragraph). In

this case it must be cleaned manually.

REMARK if you notice that the suction

power of your appliance drops, you can force

the automatic cleaning of the HEPA filter. In

this case, switch off your appliance and press

the ON/OFF button twice consecutively

(fig.28).

In this case, open the vacuum cleaner cover

(fig.18), remove the dust container and release

the HEPA filter (fig.29).

Remove the HEPA filter (5) from the separator (3)

(fig.30) and tap the filter above a dustbin

(fig.31) then clean the outside wall of the filter

under the cold water tap (fig.32).

Refit the HEPA filter in the separator (fig.33).

Lock it in position (fig.34). Refit the dust

container into its housing in the vacuum cleaner

and close the cover of the appliance (fig.27).

4 • Cleaning your vacuum cleaner

Wipe the body of the appliance and the

accessories with a soft cloth. Wash the dust

container and the separator with clean water

(fig.35-36) then dry them with a soft cloth

(fig.37).

WARNING Do not place the inside

wall of the HEPA filter under water.

Do not touch or rub the folds of the HEPA

filter. Leave the HEPA filter to dry for 24H

before refitting it in the appliance.

IMPORTANT If your HEPA filter is

damaged, you may purchase another from

your dealer or from an Approved Service

Centre (see attached list).

IMPORTANT Do not use aggressive or

abrasive detergent products. The

transparency of the dust container and/or the

separator cover may alter in time but this

does not change the performances of the

appliance.

751271_SF Cyclonic_16L_751271 08/12/10 11:23 Page15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta RO8033 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info