Bedienungsanleitung Rowenta RO8221 Silence Force Extreme Cyclonic (Seite 15 von 73) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

739276

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

ATTENTION: do not operate your vacuum cleaner

without the filtration system fitted (foam, microfilter and

filter).

* According to model: these systems are specific to certain mo-

dels or are accessories available as an option.

1 • Fitting the elements onto the

appliance

Clip the end of the hose to the suction inlet located at the

ront of the appliance (fig.1). To remove, unclip the end

sing the clip and remove.

Fix the accessory support to the notch in the parking

position located at the back of the vaccuum cleaner (fig.2)

and store the accessories on top.

Note: The accessory support does not need to be removed

to open the vacuum cleaner lid.

• Fit the metal telescopic tube to the end of the nozzle until

you hear a click indicating that it is locked (fig.3). To remove,

press the tube lock button and remove.

• Fit the multi-surface nozzle (23) to the end of the metal

telescopic tube until you hear a click indicating that it is

locked (fig.4). To remove, press the nozzle lock button and

remove.

• Adjust the metal telescopic tube to the desired length using

the telescopic system (TELESCOPIC SYSTEM) (fig.5).

Fit the corresponding accessory to the end of the metal

telescopic tube or the nozzle:

- For rugs and carpets: use the multi-surface nozzle in the

retracted brush nozzle position or the Turbo-brush* (fibres

and animal hairs).

- For smooth surfaces and smooth surfaces with crevices

(such as tiled floors): use the all-surface nozzle (23) with

the brush extended or, for better results, use the smooth

surface nozzle* (28.a*) without the removable brush.

- For fragile surfaces, such as parquet, it is recommended

to use the standard parquet nozzle (27*) or the nozzle

with a line of bristles (28.b*)

- For corners and hard to reach spots: use the telescopic

crevice nozzle*.

- For upholstery and delicate surfaces: use the brush with

the nozzle (EASY BRUSH) or the upholstery nozzle*.

2 • Plugging in the power cord and

switching on the appliance

Unwind the power cord completely, plug in your vacuum

cleaner and press the ON/OFF button (fig. 8).

Set the suction power using the manual power switch* on

the power nozzle (fig.9):

• Position (MIN) for vacuuming delicate fabrics

(curtains, textiles).

• Position (Medium) for daily vacuuming of all types

of surfaces with low levels of soiling.

• Position (MAX) for vacuuming hard floors (tiled

floors, parquet, etc.) and rugs and

carpets in the case of high levels of soiling.

3 • Storing and transporting the

appliance

After use, switch off your vacuum cleaner by pressing the

ON/OFF button and unplug it (fig. 10). Wind the power cord

by pressing the power cord wind button (fig. 11).

It is easy to carry your vacuum cleaner using the handle (8).

Do not carry your appliance using the dust compartment

handle (fig.12).

When storing your vacuum cleaner, place the tube in its

storage compartment at the back of the appliance (fig.13).

You do not need to remove the accessory support* to store

the accessory range (Fig.14).

USE

IMPORTANT: always switch off and disconnect your

vacuum cleaner before changing the accessories.

ERGONOMIC RECOMMENDATIONS

ERGO COMFORT SILENCE range

rgonomic, the ERGO COMFORT SILENCE range

has been designed to facilitate and improve user

omfort when vacuuming.

To prevent bending over and to ensure upright

osture, make sure to:

1. Adjust the length of the ERGO COMFORT

SILENCE metal telescopic tube to your body (fig.6).

2. Place your second hand on the front of the ERGO

COMFORT SILENCE nozzle handle (fig.7).

IMPORTANT: The nozzle for smooth surface with

crevices 28.a* is used to measure performance

associated to the energy label. This nozzle allows

you to optimise the dust-collection performance of

your appliance on smooth surfaces with crevices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta RO8221 Silence Force Extreme Cyclonic Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info