Bedienungsanleitung Rowenta RO8359 SILENCE FORCE Multi-cyclonic (Seite 16 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

653804

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

* Depending on models: either equipment specific to cer-

tain models or available as an optional accessory.

he air that we breathe contains particles which may be

allergenic: mite larva and excreta, mould, pollen, fumes and

nimal residues (hair, skin, saliva, urine). The finest of these

articles penetrate deeply into the respiratory system, where

they can cause inflammation and alter the respiratory function as

whole.

(H)EPA ((High) Efficiency Particulate Air Filter) filters retain the

finest particles. Thanks to the (H)EPA filter, the air that is expelled

ack into the room is cleaner than the air vacuumed.

1 • Emptying the dust compartment

(11)

fter each use, empty the dust compartment as follows:

- hold the dust compartment by the handle (without pressing on

the button) and remove it (fig.15).

- place the dust compartment upright above a dustbin and press

on the lid release button (fig.16).

- wash the dust compartment if needed in clean or

soapy water, and then leave to dry.

- press on "CLOSE" to close the cover (fig.17).

Refit the dust compartment (fig.18).

Make sure that the divider (14b) is not clogged.

2 • Cleaning the black foam filter (16a)

Press the cover release button (fig.19).

Tip the cover backwards (fig.20).

Remove the black foam filter (fig.21) and then wash and

squeeze it (fig.23). Leave to dry for at least 12 hours before

refitting.

Reposition the black foam filter and close the cover.

3 • Cleaning the microfilter (16b)

Press the cover release button (fig.19). Tip the cover

backwards (fig.20).

emove the filtration capsule (16) then separate the black

foam filter (16a) from the microfilter (16b) (fig.22).

ash the microfilter (fig.24). Leave to dry for at least 12

ours before refitting.

eposition the black foam filter and close the cover.

4 • Nettoyez le filtre HEPA (15)

Remove the dust compartment (fig.25).

Open the access hatch to the HEPA filter and remove the

HEPA filter from its housing (fig.26). Clean the HEPA filter by

gently patting it over a dustbin (fig. 27). Replace it in its

housing and close the hatch until you hear a 'click' (Fig.28).

5 • Cleaning the air/dust separator

system (14)

Remove the hose from the vacuum cleaner.

Open the vacuum cleaner cover (fig. 19-20).

Press the separator release button (fig.29) then remove the

separation system (fig.30).

Remove the separation compartment (14c) by turning

slightly to the left (fig.31) and then separate the two

components (fig. 32).

Wash the components (14a+b and 14c) in clean water (fig. 33)

and leave to dry for 6 hours.

Refit the separation system components (14):

- reposition the separation compartment (14c) on the

separation system (14a+b) (fig. 34) by turning slightly until

you hear the "CLICK" indicating that it is closed (fig. 35).

- then reposition the entire separation system (14) in the

appliance (fig. 36) and close the cover.

6 • Cleaning your vacuum cleaner

Wipe the body of the appliance and the accessories with a

soft damp cloth, then dry with a dry cloth.

Wash the dust compartment (11a+b) under clean or soapy

water, then dry with a dry cloth.

CLEANING AND MAINTENANCE

MPORTANT: Always switch off and unplug your

vacuum cleaner before maintenance or cleaning.

Check and clean your vacuum cleaner and the

different filters regularly.

IMPORTANT: do not use the vacuum cleaner once

the maximum level (12) is reached on the dust

compartment.

IMPORTANT: clean the black foam filter every

month or when the vacuuming is no longer

satisfactory.

WARNING: let the black foam filter

dry completely and make sure that it is completely

dry before refitting on the appliance.

IMPORTANT: if the appliance does not perform as

normal after cleaning the black foam filter and

microfilter on your vacuum cleaner, clean the HEPA

filter.

IMPORTANT: Fit a new HEPA filter every 12 months.

HEPA filter (Ref. ZR902501) is available at your local

retail store or at one of our Authorized Service Centres.

ATTENTION: let the microfilter dry completely and

ake sure it is completely dry before placing it back

in the appliance.

IMPORTANT: clean the HEPA filter every 6 months.

IMPORTANT: clean the microfilter every month.

758270-02_RO_ASPI_SF_MULTI-CYCLONIC_758270/02 11/06/14 15:38 Page10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta RO8359 SILENCE FORCE Multi-cyclonic Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info