WARNINGS
It is essential that you read these instructions and observe the following recommendations:
• For your safety, this appliance complies with the applicable standards and regulations or commercial (Low Voltage, Electromagnetic Compatibility, Environmental Directives, etc.)
• This appliance is designed for domestic use only. It is not to be used in industrial applications.
• The warranty will be invalid in the event of damage arising from incorrect use.
• Do not place your appliance directly beneath a wall socket.
• Do not operate your appliance in a dusty room or if there is a risk of fire.
• Each time before use, check that in general the appliance is in good condition, as well as the plug and the cord.
• Never insert any objects inside the appliance (e.g.: needles)
• If the power cord is damaged, it must be changed by the manufacturer, the After Sales Service or a similarly qualified person in order to avoid any danger.
• During use, this appliance must be kept out of the reach of young children, animals and certain disabled persons.
• Do not pull the power cord or the appliance, even to unplug it from the wall socket.
• Completely unwind the cord each time before use.
• This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no
responsibility and the guarantee will not apply.
VERY IMPORTANT
• ATTENTION: In order to avoid any risks of overheating, DO NOT COVER THE APPLIANCE:
• Do not touch the appliance with wet hands.
• Do not let water get into the appliance.
• Do not use this appliance near baths, showers, sinks or swimming pools.
• Do not use the appliance near inflammable objects and products (curtains, aerosols, solvents, etc.).
• Do not use the appliance when tilted or laid flat.
• DO NOT FORCE THE OSCILLATION BY HAND.
• In the event of prolonged absences: stop the appliance using button C (position "0" for SO7010 model with the switch for the SO7050 model and unplug it.
USE IN BATHROOMS (protection against splashing)
The construction of this "IP21" appliance allows it to be used in all rooms of the house, including those where there is a risk of vertical splashing
(kitchen, bathroom, etc.).
The electrical installation of the room, the installation of the appliance and its use must however comply with the standards in force in your country.
VOLTAGE
Prior to use for the first time, check that the voltage of your installation matches that shown on the appliance and that your installation is suited to
the power rating shown on the appliance. Your appliance can operate with a socket without an earth connection. It is a class II appliance (double
electrical insulation ).
SAFETY
In the event of overheating, an automatic safety device switches off the operation of the appliance then starts it again once it has cooled down. If the fault persists or gets
worse, a thermal fuse stops the appliance completely: it must then be taken to an approved service centre.
DESCRIPTION OF THE CONTROLS
SO7010 MODEL:
• Button C:
Operating mode selector:
- : Stop position
- : Cold ventilation
- : "Silence" position, 1200W ventilated
- : 2400W ventilated
• Indicator B:
power on/standby indicator, it lights up as soon as your appliance is switched on.
• Button D:
temperature set button:
- : Frost free position, this position allows you to maintain the temperature above 0°C automatically in a room that is normally insulated and
whose volume matches the power rating of your appliance.
- Setting range: the temperature is set to suit your idea of comfort.
•
Button E
: Function permitting the appliance to oscillate to optimise the diffusion of air in the room.
SO7010
A. Control panel
B. Power on/standby indicator
C. Operating mode selection button: switch
D. Temperature setting dial
E. Oscillation button
G. Air outlet grill
H. Air inlet grill
I. Oscillating base
J. Carrying handle
K. Cord storage
SO7050
A. Control panel
F. Display panel
G. Air outlet grill
H. Air inlet grill
I. Oscillating base
J. Carrying handle
K. Cord storage
GB
