1. Remove the safes control panel by turning it counterclockwise
2. Insert the 9V battery to the back of the control panel
3. You will hear a beep, this means the safe is ready to be used
4. To open the safe for the first time enter the preset factory code 1, 5, 9, # onto the keypad
5. The safe will beep and the yellow light will blink
6. Turn the master knob clockwise to open the door
SETTING A SECURITY CODE
1. Open the safe with the preset factory code (1, 5, 9, #) or with the emergency override key
2. Locate the small red button on the inside of the door
3. Press and hold the red button until you hear a beep
4. The yellow light on the control panel will illuminate
5. With the yellow light still on enter a new 3-8 digit security code and press the
*
button
6. If the code was correctly set you will hear two beeps and the yellow light will blink twice
For more information go to www.royalsovereign.com
①
②
③
④⑤
Owner's Manual
RS-SAFE100D
OPEN THE SAFE – SECURITY CODE
1. Using the front keypad enter your previously set 3-8 digit security code
2. To enter press the # button
3. You will hear two beeps and the green light will come on
4. Turn the master knob clockwise to open door
*
3 continuous wrong entries will lock the user out of the safe for 20 seconds.
**
If the wrong code is entered more than 3 continuous times the safe will lock user out for 5 minutes.
***
If user forgets their code use emergency override keys to unlock the safe. Then follow the steps to setting a security code to program a new security code.
OPEN THE SAFE – USING EMERGENCY OVERRIDE KEY
1. Remove the safes control panel by turning it counterclockwise
2. Insert override key into keyhole and turn the key clockwise
3. Turn the master knob clockwise to open the door
MOUNTING
Mount safe to an area that is not easy to move
1. Open safe and locate the predrilled holes on the back or bottom of the safe
2. Drill holes for expansion bolts
3. Turn the expansion bolts counter clockwise to separate
4. Use the expansion bolts to secure the safe to the wall
5. Make sure the safe is mounted in place as required and then tighten all screws
IMPORTANT INFORMATION
1. NEVER keep your emergency override keys inside your safe
2. Safe is only considered secure when fixed to a load bearing wall or join
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Royal Sovereign RS-SAFE100D wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.