Door should always be left open and unlocked for the next guest.
1. Hold safe door closed. Enter a 3-6 digit code onto the keypad.
2. Press “LOCK” button
3. The locking bolts will begin to close, once the safe is fully closed the display will read
“CLOSED”
*Be sure to hold the safe door closed until display reads “CLOSED” otherwise safe will beep and display
“ERROR”.
1. Enter the 4-6 digit code onto the keypad that was previously set
2. Locks will begin to open
3. Once the safe is fully opened the display will read “OPENED”
*3 continuous wrong entries will lock the guest out of the safe for 15 minutes.
**If guest forgets their code use emergency override keys or
master code to unlock the safe. Then follow the steps to lock the safe to program a new guest code.
1. NEVER keep your emergency override keys inside your safe
2. Safe is only considered secure when fixed to a load bearing wall or join
3. Safe has limited 1 year warranty
Mount safe to an area that is not easy to move
1. Open safe and locate the predrilled holes on the back or bottom of the safe
2. Drill holes for expansion bolts
3. Turn the expansion bolts counter clockwise to separate
4. Use the expansion bolts to secure the safe to the wall
5. Make sure the safe is mounted in place as required and then tighten all screws
