Bedienungsanleitung Ruarkaudio R2I DAB (Seite 7 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Norwegisch)

537076

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Other functions

Secondary stations

Some DAB stations have secondary services available. This is

shown by a > sign after the station name. Press OK to toggle

between the main station and secondary service.

FM Mode – Auto (Stereo) / Mono

In FM mode the R2i will adopt stereo as its default setting

however for weak stations it is possible to reduce background

noise by switching to Mono. Press and hold OK to switch

between Auto (Stereo) and Mono.

Manual Tune, AutoScan and System Reset

By pressing and holding the INFO key you can cycle through

sub-functions. Press OK to enter each.

● Manual Tune (DAB Mode)

If you know the channel and frequency of a DAB station you

can use this feature to access stations directly.

● AutoScan (DAB Mode)

This performs a new DAB scan and will add new stations as

they become available.

● System Reset (DAB & FM Mode)

This restores default factory settings and will initiate a new

DAB station scan. If you move to a new location it is likely

that the DAB services you will receive may change. Running

system reset will clear stations that are no longer available

and replace with those that are.

A detailed explanation on how to perform AutoScan and System

Reset can be found on the FAQs section of our website.

Cautions

● Listening through headphones or earphones at high volume can

cause hearing loss.

● The unit should not be exposed to dripping or splashing and no

objects containing liquids, such as vases, should be placed on

the unit.

● Ensure that the power adapter, mains plug or mains connector

into the unit is readily accessible in case disconnection from the

mains is required.

● Remote control batteries must not be exposed to excessive

heat, such as from sunshine or re, and used batteries must be

disposed of responsibly.

● The normal function of this product may be affected by strong

Electromagnetic Interference. If you experience problems, simply

reset the product to resume normal operation. If, after resetting,

the product still fails to operate correctly, try using it in a different

location.

● Keep the unit away from naked ames such as lighted candles

and heat sources such as radiators.

● The unit should be positioned at least 10cm away from adjacent

objects to ensure adequate ventilation.

General care

● Clean with a soft, lint-free duster or slightly dampened cloth. Do

not use wax sprays or other substances as these may damage

the surface nish or impair performance.

● Do not expose your unit to direct sunlight, high humidity, dust,

excessive vibration or extreme temperatures, all of which can

affect the nish, performance and reliability of the unit.

● The recommended operating temperature range is 5°C to 40°C.

● Natural wood nish cabinets will vary and lighten or darken with

age, particularly when exposed to sunlight.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ruarkaudio R2I DAB Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info