Bedienungsanleitung Ruby Fires MF1520C (Seite 9 von 36) (Deutsch, Englisch, Holländisch, Französisch)

645214

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

II. Operation of Remote Controller and Control Panel

This replace includes a remote controller. Please ensure the remote

controller is used with batteries included. The remote controller

will not work when it is without batteries or batteries out of power.

Please direct the remote controller at the electric replace at 1-5

meters distance, otherwise the remote controller could not work

properly. Please point the remote controller to the relevant grid for

the required functions. Do not cover the receiver on the remote

controller.

There is one main power switch on the appliance and four buttons

on both control panel and remote controller of the replace.

When the cassette version is built in, there is a possibility that you

have to hold the remote higher for a good connection with the

receiver.

A. POWER SWITCH: This is a switch for main power of the electric replace, turn the switch to I

for power on. Once power is turned on, it comes with a crisp warning tone to warn the operator the

power supply has been connected. All the function operations will not start automatically. To turn

off the power, turn the switch to O.

Remote Control:

B. ON/OFF: Push the ON/OFF button once to turn on the internal electric source of replace.

Meanwhile, the indicator light is on and simulated log set is lit up. Please note it will take about 48

seconds to see the ame effect due to the mist generation process. The heater functions will not

turn on unless push the heating buttons. Push the ON/OFF button again to turn off the replace.

C. DIMMER+ and DIMMER-: Flame adjustment, dimmer+ for higher ame effect and dimmer- for

lower ame effect. This unit has the memory function, it keeps the record for last ame adjustment

when you use it next time. If you don’t see the ame after 48 seconds, please try to push dimmer+,

a few times.

D. LOW/HIGH: When the unit is under working condition, push the LOW button once, the heater

starts to work at low heating after a warning tone. Push the button again, the heater stops. Push

the HIGH button once, the heater starts to work at high heating after a warning tone. Push the

button again, the heater stops. When the unit is under low heating, push HIGH button will switch

from low heating to high heating.

E. Switch off the power if you leave the replace for a long time.

Fireplace Surface Cleaning

Use a cloth dampened with warm water only to clean painted surface of electric replace. Do not

use abrasive cleaners.

Service

Except bulb replacement, water rell, atomizer cleaning and surface cleaning, all the other clean-

ings or modication please contact its service agent.

CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN THE

FIREPLACE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ruby Fires MF1520C Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info