General.
Unpack the re carefully and retain the packaging for possible future use
returning the re to your supplier
carton.
The re incorporates a ame e
eect may be enjoyed at an
electricity.
This model is designed to be installed in a surround or into a wall r
Before connecting the re check that the supply voltage is the same as that sta
Please note: Used in an environmen
a sound which is related to the operation of the ame e
for concern.
Electrical connection.
W
This re must be used on an AC ~ supply only and the v
the supply voltage.
Before switching on, please read the saf
PLEASE RET
Do not put plastic components into a dish
Only slide out the drawer when the wa
otherwise you will inadvertently alter the water lev
Only use tap water in this appliance with a maximum hardness of 10 dH .
Always ensur
If you intend not using the appliance f
water tank and dry the sump.
Once installed, never move this re or lay on its back, without draining the water from sump
and water tank.
The water tank, sump, sump lid, tank cap and air lters must be cleaned once every two weeks,
particularly in hard water areas.
The re appliance should never be operated if the lamps are not working.
The lamps should be regularly inspected as described under ‘Maintenance’ and ‘Changing
lamps’.
Installation Instructions
Ensure that all packing items are remov
Retain all packing for possible future use, in the ev
your supplier
T
re we rec
ventilation.
Insert bulbs rst before you connect to mains.
Bulbs in separate pack.
T
Hold the re by the sides of surround and gently manoeuvre int
13amp/240 volt outlet. Ensure that the supply cable exits at the fr
hand corner to suit your supply socket location and is not trapped under the re such that it migh
cause it to be damaged.
Before switching on the appliance
IMPORT
Important Safety Advice:
When using electrical appliances, basic precautions should alway
risk of re, electrical shock and injury to persons, including the following:
If the appliance is damaged, check with the supplier before installation and oper
Do not use outdoors.
Do not use in the immediate surroundings of a bath, show
Do not locate the re immediately below a x
This appliance is not intended f
supervision if their physical, sensory or mental capabilities prevent them fr
Children should be supervised to ensure that they do not play with the appliance
Do not use this re in series with a thermal control
other device that switches on the heat aut
accidentally cov
Ensure that furniture
metre from the re
In the event of a fault unplug the re
Unplug the re when not required for long periods.
Although this re complies with safety standards
carpets or on long hair type of rugs.
The appliance must be positioned so that the plug is acc
If the supply cord is damaged it must be replaced by the manufacturer or service agent or a
similarly qualied person in order to av
Keep the supply cord a
W
garments on the re, or obstruct the air circulation ar
The re carries the
RUBY FIRES Mystic F
Before using the manual controls rstly ll the w
tank’).
Manual Controls.
The manual controls are locat
(See Fig.2 f
Switch
Note: I ) position for the re to oper
Switch
Press once to turn on ame e. This will be indicated b
Although the main lights operate immediately it will take a further 30 seconds before the
ame eect starts.
Press again to give ame e
Press again to give ame e. T
Press again to return to ame e.
Thi
Press to put re in to standb
Thi
Control Knob
T
clockwise will decrease the ame eect.
When the water tank is empty the main lamps go out. See instructions under
water tank’
before the ames return.
Remote Control Oper
On the control panel, Swit( I ) position in order for the remote
control to operate
T
The remote contr
Press once to turn on Flame eect only.
Thi
Pre
Thi
Pre.
Thi
Standby
Thi
Battery Information.
1. Unclip the battery cover on the back of the remote contr
2. Install AAA batteries into the remote contr
3. Replace the battery cover
Discard leaky batteries.
Dispose of batteries in the proper manner according t
Any battery may leak electrolyte if mixed with a dier
batteries are not replaced at the same time
battery not intended to be recharged.
Thermal safety cut-out
A thermal safety cut-out is incorporated in the fan heater to preven
can happen if the heat outlet is restricted in any way
socket outlet and allow approximately 10 minut
on remove any obstruction that may be r
Tips for using y
1. Only pull out the drawer when its time to rell the w
lead to excess wat
sump as instructed under
2. W
last 3 times as long than when it is at maximum ame setting.
3. Do not tilt or move the re while there is wat
4. Make sure that the re is on a level oor
5. T
6. Sometimes the ames appear more real when the ame control knob is turned down.
7. Give the ame generator some time to react to changes y
Maintenance
W
MAINTENANCE
Changing lamps.
If a large amount of the smoke appears grey or colourless it may be that one or mor
failed.
Y
1. Leaving the ame eect on, open the draw
Fig.3)
2. V
3. Put Switch
4. Leave the appliance f
5. Remove the water tank by lifting upwar
6. Remove the sump as described in the Cleaning Section.
7. Remove the defective lamp
holder
lamp. Pur
8. Carefully insert the two pins of the new lamp into the two holes in the lamp holder
place. (See Fig
9. Replace the sump and water tank and carefully close the draw
10. Switch on.
3
