Bedienungsanleitung Rupes GTV18 (Seite 6 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

489870

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

English - 6 -

WARNING: Non-observance of the safety

rules while working with the hot air tool

can lead to fire, explosion, electric shock or

burns. Read the operating instructions before using

the tool and always observe the safety rules. Save

these instructions and give them to persons that have

not been instructed before they use the tool.

WARNING: A damaged casing or an ope-

ned unit can lead to a hazardous electric

shock. Do not open the unit and do not put

a damaged unit into operation. Do not drill into the

casing, e.g., to attach a company label. Before any

work on the unit, pull the mains plug.

WARNING: A damaged power cord can

lead to a hazardous electric shock. Check

the power cord regularly. Do not operate

the unit when the power cord is damaged. Always

have a damaged cord replaced through a specialist.

Do not wrap the cord around the unit and protect it

from oil, heat and sharp edges. Do not carry the unit

by the cord and do not use the cord to pull the plug

from the outlet.

WARNING: Do not work in rain or in a

moist or wet environment. This can lead to

a hazardous electric shock. Keep the unit

dry. Store the unit in a dry location when not in use.

Consider the weather conditions. Do not work in wet

sanitary facilities. Avoid body contact with groun-

ded cables or surfaces, such as pipes, radiators,

ranges and refrigerators.

WARNING

: Connect power tools that are

used in the open via a residual current cir-

cuit breaker (RCCB).

WARNING

: Danger of explosion! The hot air

tool can explosively ignite combustible fluids

and gases. Do not work in a potentially

explosive environment. Check the surrounding

before starting to work. Do not work on fuels or gas

containers or in their vicinity, even when they are

empty.

WARNING

: Danger of fire! Heat can reach

combustible materials that are hidden behind

coverings, in ceilings, floors or cavities, and

ignite them. Inspect the work area before starting to

work and in case of doubt, abstain from using the

hot air tool. Do not point the unit at the same spot for

extended periods.

WARNING

: Danger of fire! An unsupervised

operating hot air tool can set fire to objects

that are close by. The unit must be supervised

at all times during operation. When allowing the

switched off unit to cool down, always place it down

vertical and standing. Allow the unit to cool down

completely.

WARNING

: Danger of fire! When working

plastics, varnish or similar materials, gases

develop that are easily inflammable and can

lead to explosions. Be prepared for flames to deve-

lop and keep suitable fire-extinguishing means at

hand.

WARNING

: Danger of intoxication! When

working plastics, varnish or similar materials,

gases develop that can be aggressive or

toxic. Avoid breathing in vapours, even when they

appear to be harmless. Always provide for good

ventilation of the work area or wear a respirator.

WARNING

: Danger of injury! The hot air jet

can injure persons or animals. Touching the

hot tube of the heating element or the nozzle

leads to skin burns. Keep children and other persons

away from the unit. Do not touch the tube of the hea-

ting element or the nozzle when they are hot. Do not

use the unit as a hair dryer; it develops much more

heat than a hair dryer. Do not use the unit to heat up

fluids or to dry objects or materials that are

destroyed through the influence of hot air.

WARNING

: Unintentional starting or unex-

pected switching on of the heating element

after actuation of the thermal relay can lead

to injuries. Make sure that the switch is set to OFF

when connecting the unit to the mains supply. Switch

the unit OFF when the thermal relay has actuated.

WARNING

: Danger of injury! Using an air-

flow reflection nozzle that is not suitable for

your unit can lead to burns. Use only original

accessories for your model that are listed in these

operating instructions.

WARNING

: Danger of injury and fire! The

hot air tool is dangerous for children. Keep

the hot air tool out of the reach of children

DANGER: Danger of overheating! Incorrect

handling can lead to an accumulation of heat

and thus damage the unit. Do not operate the

unit when it is placed down horizontally or when

pointed downward. The air-intake opening and the

nozzle must not be covered. Use only nozzles that

are suitable for your unit.

Recycle raw materials instead of disposing

as waste. The unit, accessories and packag-

ing should be sorted for environmentally-

friendly recycling.

Safety Rules

WELDY.book Seite 6 Mittwoch, 17. Mai 2006 1:02 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rupes GTV18 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info