TYPE
P550E
INPUT POWER 550 W
IDLE SPEED 0 ÷ 3300 R.P.M.
ELECTRONIC CONTROL YES
ROTATION RIGHT/LEFT YES
PERCUSSION mm
-1
0 ÷ 52800
DRILLING STEEL MAX 10
DRILLING WOOD MAX 25
DRILLING IN CONCRETE MAX 20
COLLAR DIAMETER 43
CORNER DIMENSION 25
CHUCK OPENING WIDTH 13
THREAD OF WORK SPINDLE 1/2’’-20UNF
WEIGHT 1,7
TECHNICAL DATA ENGLISH
4. DOUBLE INSULATION
Our equipment is designed in accordance with
European regulations (EN standards) for the utmost
safety of the user. Machines with double insulation al-
ways carry the international symbol.
The machines do not require earthing. A two core
cable is sufficient. The machines are interference-
suppressed in accordance with EN 55014.
5. INITIAL OPERATION
Before the first operation check that the mains
voltage corresponds to that given on the machine
nameplate.
6. TRIGGER SWITCH WITH BUTTON FOR
CONTINUOUS OPERATION
The machine is set in operation by pressing in the
handle switch (1). The holding button (2) on the side
of the switch can be pressed for continuous
operation. To release the continuous operation
merely depress the switch, which makes the holding
button spring back automatically.
7. CHANGING DIRECTION OF ROTATION
(main rotation - clockwise)
Direction of rotation of the drill spindle is changed
using the reversing switch (3).
R = Clockwise (Right)
L = Anticlockwise (Left)
Important!
Presa the reversing switch until it reaches the re-
spective end position at the housing, i. e. until it can
be felt to engage!
The reversing switch is easiest to operate by
using the thumb and index or middle finger from
both sides.
Attention!
Change direction of rotation only when the motor has
ceased turning! When using the drill as a screwdri-
PERCUSSION DRILL P550E
1ON/OFF switch
2 Holding button for continuous operation
3 Reversing switch
4 Switching from normal drilling to percussion
drilling
5 Quick-change chuck
6 Auxiliary handle
2. USE
This drill is universally suitable for percussion drilling
in rock, for drilling and as a screwdriver with wood,
metal and plastic and for cutting threads.
3. SAFETY INSTRUCTIONS AND PREVENTION
OF ACCIDENTE
Before operating the machine, please read through
the operating instructions completely, follow the
Safety Instructions in this manual as well as the
generai Safety Instructions for Power Tools in the
accompanying booklet.
Caution!
•Pay attention to the jamming moment of the
machine, e. g. if the drill jams or if the drill hits
concrete reinforcing steel and jams!
• Before fitting tools in the chuck or drill spindle
disconnect the machine from the power supply
•Do not work with materiale which contain
asbestos!
•Outside power sockets must be protected with
residual-current-operated circuit-breakers (r.c.c.b.).
•Do not drill holes into the housing to label the
machine. The protective insulation will be bridged.
Please use self-adhesive labels.
• Always lead cables away towards the back of the
machine.
• Wear ear protectors with impact drills. Exposure to
noise can cause hearing loss.
• Use auxiliary handles supplied with the tool. Loss
of control can cause personal injury.
