8
TECHNICAL DATA ENGLISH
TYPE RP84
PROTECTION CLASS II
OPERATING VOLTAGE 230 V - 50 Hz
ABSORBED CURRENT 1,7 A
ABSORBED POWER 350 W
ROTATIONN RPM 20.000
DIAMETER OF COLLET mm 6
WEIGHT Kg 2,0
8
GENERAL WARNINGS
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the “SA-
FETY INSTRUCTION” booklet which forms an integral part of these docu-
ments; the operating instructions indicate the additional information requi-
red specifically for use of the tool.
Any operations carried out on the tool must be effected with the power
supply disconnected.
Before starting the tool, ensure that it is held tightly and not in contact with
the work surface.
The cutters or must be correctly mounted and tightened.
Make sure that the sparks caused during work do not create danger by
hitting people or inflammable substances.
During machine use, dust, chips and shavings may form or touch rotating
machine parts: due to potential risks, we recommend the constant use of
P.S.D. (personal safety devices such as gloves, headphones, goggles, fa-
ce masks, etc.) according to laws in force to prevent or reduce accident
probability.
Extended machine use may cause hearing damage: wear protective
headphones.
Warning: the appliance continues to work for a few seconds after it has
been switched off. The cutters can reach high temperatures: pay attention
to injury hazards to persons or things or fire hazards.
SPECIFIC USE
Before use make sure that the cutters operating characteristics are com-
patible with those of the machine and that they are not broken or worn.
Make sure that the cutters are assembled, handled and stored with care
according to the manufacturer's indications.
Do not use and adapter system for cutters with tangs other than those
specified.
The machine must not be operated in humid environments or in the pre-
sence of flammable gas or liquids.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or ac-
cidents.
