8
TECHNICAL DATA ENGLISH
8
GENERAL WARNINGS
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the
“SAFETY INSTRUCTION” booklet which forms an integral part of the-
se documents; the operating instructions indicate the additional infor-
mation required specifically for use of the tool.
Never use the tools without the safety guards.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
The tool must always be used with the protective shield mounted.
The abrasive wheel must be correctly mounted and tightened.
Make sure that the sparks caused during work do not create danger
by hitting people or inflammable substances. Hazardous dust may
form during use regulation safety devices for
personal protection and observe safety norms valid for the processed
work material. During tool use pieces of the wheel of work material
may break off causing serious injuries to people or things: remember
to always use all
personal protection devices (such as gloves, headphones, goggles,
etc.) according to laws in force to prevent or reduce accident probabi-
lity.
Warning: the appliance continues to work for a few seconds after it
has been switched off!
SPECIFIC USE
Before use make sure that the wheels or cutters operating characteri-
stics are compatible with those of the machine and that they are not
broken or worn.
Make sure that the wheels or cutters are assembled, handled and sto-
red with care according to the manufacturer's indications.
Do not use and adapter system for cutters with tangs other than those
specified.
Do not use the wheel cutting edge as grinder.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or
accidents.r accidents.
MODEL
WORKING PRESSURE bar
AIR CONSUMPTION l/min
RPM
COLLET DIAMETER mm
WEIGHT Kg
SML25
6
450
25000
6-6,35
0,450
SML22L
6
450
22000
6-6,35
0,800
