66
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been supervised/instructed and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be done by children unless they are older
than 8 and supervised. Keep the appliance and cable out of reach
of children under 8 years.
2 If you overfill, the kettle may spit boiling water.
3 Use the kettle only with the stand supplied (and vice versa).
4 If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
H Don’t put the kettle, stand, cable, or plug in any liquid; don’t use the kettle in a bathroom,
near water, or outdoors.
5 Keep the kettle, stand, and cable clear of the edges of worktops and out of reach of children.
6 Don’t use the kettle for any purpose other than heating water.
7 Don’t operate the appliance if it’s damaged or malfunctions.
household use only
C FILLING
1 Squeeze the lid lock into the lid to open it.
2 Fill with at least 2 cups of water, but not above max.
3 Close the lid, and press down to lock it.
C SWITCHING ON
4 Put the stand on a stable, level surface.
5 Plug the stand into the wall socket.
6 Put the kettle on the stand.
7 The display will show the temperature of the water in the kettle.
8 Press and release the < button.
9 100 will show on the display.
10 < will blink on the display.
boil
11 If you want to boil the water, do nothing.
variable temperature
12 Use the u and d buttons to set the temperature.
13 The temperatures available are: 100 (boil), 95, 90, 85, 80, 75, 70, 65, 60, 55, 50, 45, 40, 35, 30,
and 25 (that’s °C).
14 After 5 seconds, < will stop blinking, to show the temperature is set.
15 When the water reaches the temperature you set:
a) < will disappear from the display.
b) The display will show the temperature of the water in the kettle.
