Bedienungsanleitung Russell Hobbs 23821-56 (Seite 4 von 68) (Alle Sprachen)

705927

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

5. Replace the lid.

6. Align the pips on the cap with the slots in the hole in the lid, ﬁt the cap, and turn it clockwise to lock

it. Don’t run the appliance without ﬁtting the cap.

7. Check that the speed control is set to O.

8. Put the plug into the power socket.

9. Turn the speed control to the speed you want (1 = low, 2 = high).

10. Turn the speed control back to O to turn the motor oﬀ.

• Generally, large quantities, thick mixes, and a high ratio of solids to liquids require longer timings and

slower speeds.

• Smaller quantities, thinner mixes, and more liquids than solids require shorter timings and higher

speeds.

• Turning the speed control anti-clockwise to Y will give you a short burst at high speed. In this

direction, the knob is spring-loaded. When you let go, it’ll return to O.

• To add ingredients while the blender is working, remove the cap, pour the new ingredients through

the hole then replace the cap.

When you have ﬁnished:

• Switch the appliance oﬀ (O) and unplug it.

CRUSHED ICE

For best results, full the jug with between 150ml and 500ml of ice cubes.

Put the lid on the blender, then:

1. Turn the speed control to Y for a second or two, then release it.

2. Check the results and repeat as required.

USING THE PERSONAL BLENDER

1. Unscrew the collar from the jug and carefully remove the blade unit.

2. Add the ingredients to the bottle. Don’t ﬁll past the 600ml marking.

3. Carefully ﬁt the blade unit to the bottle then screw on the collar.

4. Lower the assembled bottle, blade unit and collar onto the motor unit.

5. Place the palm of your hand over the top of the bottle and press ﬁrmly downwards. Maintain this

pressure during processing or your blender won’t operate.

6. Turn the speed control to Y for a second or two, then release it.

7. Check the results and repeat as required.

8. To process continuously, turn the speed control to 1 or 2. Keep ﬁrm downward pressure on the bottle

with your hand.

9. Once processed, unscrew the collar, carefully remove the blade unit and ﬁt the bottle lid.

CARE AND MAINTENANCE

1. Switch the appliance oﬀ (O) and unplug it.

2. Wipe the outside of the motor unit with a clean damp cloth.

3. Hand wash the removable parts.

¬ You may wash these parts in the top rack of a dishwasher.

` You may wash these parts in the dishwasher.

If you use a dishwasher, the harsh environment inside the dishwasher will aﬀect the surface ﬁnishes. The

damage should be cosmetic only, and should not aﬀect the operation of the appliance.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances

and rechargeable and non-rechargeable batteries marked with one of these symbols

must not be disposed of with unsorted municipal waste. Always dispose of electrical

and electronic products and, where applicable, rechargeable and non-rechargeable

batteries, at an appropriate official recycling/collection point.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Russell Hobbs 23821-56 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info