Bedienungsanleitung Ruwido Digital 3 (Seite 9 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

489754

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

USER MANUAL

ruwido digital_3 Universal remote control

G. Additional functions

Key and mode lock

After a successful programming (STB, SAT or TV mode) certain keys can be locked.

(Protection against faulty operation)

1. Press the TV key and keep it pressed until the green LED ﬂ ashes twice in quick

succession. (after approx. 3 seconds).

2. Within 10 seconds of seeing the 2 ﬂ ashes above, enter the code 0 9 9, the green

LED ﬂ ashes twice again.

3. Now you can deactivate single keys by pressing them. (The LED ﬂ ashes at each

key press, to conﬁ rm the input).

Please note: you have the possibility to lock the complete mode by pressing the mode

selection key (STB, SAT or TV).

4. After deactivating the last desired key press “TV” in order to complete the

procedure.

If no button is pressed within 10 seconds after the previous step, the remote control

returns to standard operating mode (the red LED ﬂ ashes up for two seconds).

To apply the single key lock for the STB and SAT mode please proceed as described

for the TV mode, but instead of “TV” key use the “STB” or “SAT” key.

Only the function „Reset“ (Code 0 0 0) cancels the single key lock.

Please note: After a reset, the code needs to be programmed again.

Following keys are excluded from the single key lock procedure:

• Standby • Numbers 0 to 9

• Cursor • P+ / P–

• V+ / V– • Mode keys (STB / SAT / TV)

Code lock

After a successful programming (STB, SAT or TV mode) each mode can be protected,

so that your remote control is not reprogrammed by another user by accident.

1. Press the TV key and keep it pressed until the green LED ﬂ ashes twice in quick

succession (after approx. 3 seconds).

2. Within 10 seconds of seeing the 2 ﬂ ashes above, enter the code 0 8 8, the green

LED ﬂ ashes twice again.

Now the TV mode is protected against reprogramming by accident.

To remove the code lock follow the same procedure (unlocking).

1. Press the TV key and keep it pressed until the green LED ﬂ ashes twice in quick

succession (after approx. 3 seconds).

2. Within 10 seconds of seeing the 2 ﬂ ashes above, enter the code 0 8 8, the green

LED ﬂ ashes twice again.

Now the TV mode can be programmed.

To apply the code lock for the STB and SAT mode please proceed as described for the

TV mode, but instead of “TV” key use the “STB” or “SAT” key.

Volume function#

In the SAT and STB mode you have also the possibility to control the volume of the

TV-set.

1. press the “SAT or STB” key for minimum 3 seconds until the LED ﬂ ashes twice

2. within ten seconds of seeing the 2 ﬂ ashes above, enter the code 0 0 4, the LED

ﬂ ashes twice again to acknowledge the function.

To deactivate this function enter the code 0 0 5.

BA V1 digital_3, 105x210 mm, 1c,9 9BA V1 digital_3, 105x210 mm, 1c,9 9 16.07.2008 19:14:5516.07.2008 19:14:55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ruwido Digital 3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info