Bedienungsanleitung Ruwido H1 (Seite 7 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

489760

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Easy programming for the control of your CD PLAYER

(not for 5 in 1 model)

To programme the remote control to operate your CD PLAYER, proceed as described for the

television set. Complete steps 1 to 10 except you must ﬁ rst press and release the

SHIFT

key

followed by holding down the

key. Please ensure that you refer to the codes listed under the CD

section and not the TV section.

Easy programming for the control of your TUNER (RADIO)

(not for 5 in 1 model)

To programme the remote control to operate your TUNER, proceed as described for the CD PLAYER

but using the

TUNER

key instead of the CD key. Please ensure that you refer to the

codes listed under the TUNER section and not the CD PLAYER section.

Easy programming for the control of your TAPE RECORDER

(TAPE DESK) (not for 5 in 1 model)

To programme the remote control to operate your TAPE RECORDER, proceed as described for the

CD PLAYER but using the

TAPE

key instead of the CD key. Please ensure that you refer to the codes

listed under the TAPE section and not the CD PLAYER section.

Easy programming for the control of your AMPLIFIER

(not for 5 in 1 model)

To programme the remote control to operate your AMPLIFIER, proceed as described for the CD

PLAYER. Complete steps 1 to 10, using the

AMP

key on your remote control. Please ensure that you

refer to the codes listed under the AMPLIFIER section and not CD PLAYER section.

Code scan

If programming using the codes in the enclosed list failed to work then you must next try the

automatic code scan.

A. Ensure that the remote control is equipped with 2 new batteries (see step one of easy

programming procedure).

B. Switch on your TV SET. When using the automatic scan function for the VCR, DVD, CD or

TAPE, switch on your device, insert a video tape, DVD, CD or tape cassette and put the unit into

‘Play mode’ i.e, the VCR tape etc is running.

C. Press the

key of your remote control for approx. 4 seconds until the LED ﬂ ashes twice.

D. After seeing the 2 ﬂ ashes and within 5 seconds, enter the code

. After entering the

code the LED will ﬂ ash twice indicating that the code has been accepted

E. Press and hold the key until your TV switches off. Please note that this process might take

up to 15 minutes. During the automatic scanning you can remove your ﬁ nger or

change hands provided it is replaced within 8 seconds. If left off of the key for more than 8

seconds then the remote will revert back to its normal mode. If your TV switches into Stand-By

mode during the automatic process then immediately remove your ﬁ nger from the key and

then press the

key until the LED ﬂ ashes twice, this will then store the code that the remote

control has found.

F. In some cases during the automatic scanning search the remote control might ﬁ nd several codes

that appear to operate your TV etc, however, if some of the buttons fail to work

properly then it’s possible the remote has found a partially compatible code. In such cases you

will need to restart the automatic scanning process (steps B. to F.) until a better code is found.

Please note that once the automatic process is restarted, the remote continues from the last

stored code and not at the beginning of code database.

• To complete a code scan for the VCR, DVD, CD or TAPE, follow the procedure above but use

the key and not the key

• To complete a code scan for the TUNER, follow the procedure above but use the key

USER MANUAL

BA Universal-FB Retail, Flash-So7 7BA Universal-FB Retail, Flash-So7 7 02.07.2007 12:47:1602.07.2007 12:47:16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ruwido H1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info