Bedienungsanleitung Ryobi ccs 1801dm one (Seite 16 von 209) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

383094

Zoom out

Zoom in

Vorherige Seite

1/209

Nächste Seite

GENERALSAFETYRULES

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

■ Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from intended could result

in a hazardous situation.

BATTERY TOOL USE AND CARE

■ Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

■ Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

■ Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

■ When battery pack is not in use, keep it away

from other metal abjects like paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a fire.

■ Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

SERVICE

■ Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

■ Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories. Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.

■ Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion

and possibly injury.

WARNING

Batteries vent hydrogen gas and can explode

inthe presence of a source of ignition, such as a

pilot light. To reduce the risk of serious personal

injury, never use any cordless product in the

presence of open flame. An exploded battery can

propel debris and chemicals. If exposed, flush

with water immediately.

CIRCULAR SAW SAFETY

■ Keep hands away from cutting area and blade.

Keep your second hand on auxiliary handle or

motor housing. If both hands are holding the saw,

they cannot be cut by the blade.

■ Do not reach underneath the workpiece. The

guard cannot protect you from the blade below the

workpiece.

■ Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade teeth

should be visible below the workpiece.

■ Never use damaged or incorrect blade washers or

bolts. The blade washers and bolt were specially

designed for your saw, for optimum performance and

safety of operation.

■ NEVER hold piece being cut in your hands or

across your leg. Secure the workpiece to a stable

platform. It is important to support the work properly

to minimize body exposure, blade binding, or loss of

control.

■ Hold power tool by insulating gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring. Contact with a

"live" wire will also make exposed metal parts of the

tool live and shock the operator.

■ When ripping always use a rip fence or a straight

edge guide. This improves the accuracy of cut and

reduces the chance of blade binding.

■ Always use blades with correct size and shape

arbor holes. Blades that do notmatch the mounting

hardware of the saw will run eccentrically, causing

loss of control.

■ Never use damaged or incorrect blade washers or

bolts. The blade washers and bolt were specially

designed for your saw, for optimum performance and

safety of operation.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

CCS-1801DM 1/06/05 14:53 Page 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi ccs 1801dm one Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info