Bedienungsanleitung Ryobi eag 8011 (Seite 7 von 70) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

391198

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

THANK YOU FOR BUYING A RYOBI PRODUCT.

To ensure your safety and satisfaction, carefully read

through this OWNER’S MANUAL and the SAFETY

INSTRUCTIONS before using the product.

INSTRUCTIONS FOR SAFE HANDLING

■ Make sure that the tool is only connected to the

voltage marked on the name plate.

■ Never use the tool if its cover or any bolts are missing.

If the cover or bolts have been removed, replace them

prior to use. Maintain all parts in good working order.

■ Always secure tools when working in elevated

positions.

■ Never touch the blade, grinding wheel or other

moving parts during use.

■ Never start a tool when its rotating component is in

contact with the work piece.

■ Never lay a tool down before its moving parts have

come to a complete stop.

■ ACCESSORIES: The use of accessories or

attachments other than those recommended in this

manual might present a hazard.

■ REPLACEMENT PARTS: When servicing use only

identical replacement parts.

ANGLE GRINDER SAFETY PRECAUTIONS

■ Check that the speed marked on the grinding wheel is

equal to or greater than the rated speed of the tool.

■ Ensure that the dimensions of the grinding wheel are

compatible with the tool and that the wheel fits

the spindle.

■ Grinding wheels must be stored in a dry place.

■ Grinding wheels must not be used for any operation

other than grinding.

■ Grinding wheels must be stored and handled with care

in accordance with the manufacturer’s instruction.

■ Inspect the grinding wheel before use to ensure that it is

not chipped or cracked. Chips or cracks can cause the

wheels to shatter, resulting in possible serious injury.

■ Ensure that the wheel is fitted in accordance with

this manual.

■ Ensure that the grinding wheel is correctly mounted

and tightened before use and run the tool at

no-load speed for 30 seconds in a safe position.

Stop immediately if there is considerable vibration or

if other defects are detected. If this condition occurs,

check the tool to determine the cause.

■ Do not use separate reducing bushings or adapters to

adapt large hole grinding wheels.

■ Check that the work piece is properly supported.

■ Use only grinding wheels approved by authorized

service centre

■ Ensure that sparks resulting from use do not create

a hazard e.g. do not hit people, or ignite flammable

substances.

■ Always use protective safety glasses and ear

protectors.

■ Use other personal protective equipment such as

gloves, apron and helmet when necessary.

■ Never place the tool on the floor or other surfaces

while it is running.

■ Grinding wheels continue to rotate after the tool is

switched off.

■ Never touch the wheel or place it on the floor or other

surfaces while it is rotating.

■ The flange and clamp nut must have same outer

diameter.

■ Do not remove the soft paper in the center of the

grinding wheel. (If the paper has been previously

removed, insert some soft paper or rubber between

grinding wheel and flange.)

■ Use the tool only for approved applications. Never

use coolants or water or use the tool as a fixed tool.

■ Grip the tool securely with both hands while operating.

SPECIFICATIONS

EAG-8011 EAG-8012

Grinding wheel 115 mm (4-1/2”) 125 mm (5")

Voltage* 230 V ~ 50 Hz 230 V ~ 50 Hz

Input 800 W 800 W

Spindle thread M14 M14

No load speed 11,000 min

-1

11,000 min

-1

Overall length 310 mm 310 mm

Net weight 2.35 kg 2.35 kg

* Be sure to check the nameplate on the product,

because the voltage is subject to change depending

on the area in which the product is to be used.

Maximum circumferential speed of grinding wheel:

4,800 m/min.

Example of calculation:

4,320 = 3.14 x 125 x 11,000 / 1,000

4,320: Circumferential speed of grinding wheel

125: Wheel diameter

11,000: No load speed of grinder

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

EAG-8011-8012_20 lgs 10/08/05 11:19 Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi eag 8011 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info