Bedienungsanleitung Ryobi ejs 600 qeo (Seite 14 von 142) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

383659

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

OPERATION

If you have the lock-on feature engaged during use and

your saw becomes disconnected from power supply,

disengage the lock-on feature immediately.

WARNING

Before connecting your saw to power supply

source, always check to be sure it is not in lock-

on position (depress and release switch trigger).

Failure to do so could result in accidental starting

of your saw resulting in possible serious injury.

Also, do not lock the trigger on jobs where your

saw may need to be stopped suddenly.

VARIABLE SPEED (Fig. 2)

Your saw has a variable speed control selector (2)

designed to allow operator control and adjustment of speed

and power limits. The speed and power of your saw can be

increased (R) or decreased (L) by rotating the variable

speed control selector in the direction of the arrows.

Note: Hold your saw in normal operating position and

turn the variable speed control selector counterclockwise

to increase speed and power. Turn clockwise to decrease

speed and power.

If you wish to lock the switch on at a given speed, depress

the switch trigger, push in and hold the lock-on button,

and release the switch trigger. Next, adjust the variable

speed control selector until the desired speed is reached.

Note: If the variable speed control selector is fully turned in

the clockwise direction (zero setting) your saw may not run.

Note: If you desire not to use the variable speed control

selector, turn it in the full counterclockwise direction.

This will allow the speed of your saw to be controlled by

the amount of switch trigger depression.

Avoid running your saw at low speeds for extended

periods of time. Running at low speeds under constant

usage may cause your saw to become overheated.

If this occurs, cool your saw by running it without a load

and at full speed.

The following guidelines may be used in determining

correct speed for various applications:

■ LOW speed is ideal when minimum speed and power

is required, for example starting cuts.

■ MEDIUM speed is suitable for cutting hard metals,

plastics and laminates.

■ HIGH speed produces best results when maximum

power is required, for example cutting wood.

Soft metals such as aluminum, brass and copper also

require high speeds.

BLADE STORAGE (Fig. 3) (FOR EJS-600QEO ONLY)

A convenient feature on your saw is the blade storage.

The blade storage area (11) is located on the back of

dust port. It is convenient for storing extra blades when

not in use.

■ To open: Pull the door down with your thumb or

finger.

■ Place blades in blade storage area.

■ To close: Push the door up with your thumb or finger.

WARNING

Do not insert saw blade (7) into air vents.

They could come in contact with electrically live

internal parts and cause electric shock, resulting

in serious injury.

WARNING

Your saw should never be connected to power

supply when you are assembling parts, making

adjustments, installing or removing blades or

when not in use. Disconnecting your saw will

prevent accidental starting which could cause

serious injury.

TO INSTALL BLADES (Fig. 4)

■ Unplug your saw.

WARNING

Failure to unplug your saw could result in

accidental starting causing possible serious injury.

■ Pull quick release lever (16) upward.

■ Insert saw blade as far as possible into slot in

saw bar.

■ Check to make sure the back of the saw blade is

properly positioned in the groove of the

roller guide (12).

■ Release the quick release lever.

WARNING

To avoid possible serious injury, always wear

safety goggles or safety glasses with side

shields. Keep hands and fingers away, from the

motor housing and blade clamp and do not reach

underneath work while blade is cutting.

WARNING

To avoid serious personal injury, do not use saw

without safety guard properly in place.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

EJS-500-600QEO_20 lgs 22/01/06 17:49 Page 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi ejs 600 qeo Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info