Bedienungsanleitung Ryobi ess 1890 c (Seite 12 von 121) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

390156

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

GENERAL SAFETY RULES

■ Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

■ If devices are provided for the connection of dust

extraction andcollection facilities, ensure these

are connected and properly used. Use of these

devices can reduce dust related hazards.

POWER TOOL USE AND CARE

■ Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it was designed.

■ Do not use the power tool if the switch does not turn

it on and off. Any power tool that can not be controlled

with the switch is dangerous andmust be repaired.

■ Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

■ Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

■ Maintain power tools. Check for misalignment or

bindling of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

■ Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from intended could result

in a hazardous situation.

SERVICE

■ Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

■ Check damaged parts. Before further use of the tool,

a guard or other part that is damaged should be

carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, free running of moving parts,

breakage of parts, mounting and any other part that is

damaged should be properly repaired or replaced by an

authorized service center unless otherwise indicated in

this instruction manual. Have defective switches

replaced by an authorized service facility. Do not use

the tool if the switch does not turn it on and off.

SPECIFIC SAFETY INSTRUCTIONS FOR

SANDERS

■ Always wear safety goggles and a dust mask

when sanding, especially sanding over-head.

■ The machine is not suitable for wet sanding.

■ Do not use sanding paper larger than needed.

Extra paper extending beyond the sanding pad can

also cause serious lacerations.

■ The dust bag shall be equipped with the tool.

And it shall be emptied frequently. To connect dust bag,

insert the adapter of dust bag to the dust-collection

opening on the rear end of the sander.

WARNING

Do not throw sanding dust on an open fire because

materials in fine particle form may be explosive.

WARNING

A suitable breathing respirator must be worn

while sanding lead paint, some woods and metal

to avoid breathing the harmful/toxic dust or air.

SPECIFICATION

ESS-1890 ESS-2590V

Input 230 V ~ 50 Hz 230 V ~ 50 Hz

Wattage 180 W 250 W

No load speed 12000 OPM 6000-12000 OPM

Orbital diameter 1.6 mm 1.6 mm

APPLICATIONS

Use only for the purposes listed below:

■ Sanding on wood surfaces.

■ Removing rust from and sanding steel surfaces.

■ Sanding plastics.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

ESS-1890ESS-2590V(EU)-25.qxd 8/15/04 4:52 PM Page 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi ess 1890 c Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info