Bedienungsanleitung Ryobi EWS-1366 (Seite 15 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

491257

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

GENERAL SAFETY RULES

■ If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of these

devices can reduce dust related hazards.

POWER TOOL USE AND CARE

■ Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it was designed.

■ Do not use the power tool if the switch does not turn

it on and off. Any power tool that can not be controlled

with the switch is dangerous and must be repaired.

■ Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

■ Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

■ Maintain power tools. Check for misalignment or

bindling of moving parts, breakage of parts and

any other condition that may affect the power

tools operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

■ Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from intended could result

in a hazardous situation.

SERVICE

■ Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is

maintained.

■ Check damaged parts. Before further use of the tool,

a guard or other part that is damaged should be

carefully checked to determine that it will operate

properly and perform its intended function.

Check for alignment of moving parts, free running of

moving parts, breakage of parts, mounting and any

other part that is damaged should be properly repaired

or replaced by an authorized service center unless

otherwise indicated in this instruction manual. Have

defective switches replaced by an authorized service

facility. Do not use the tool if the switch does not turn it

on and off.

PARTICULAR REQUIREMENTS FOR

CIRCULAR SAWS

Not to use any abrasive wheels

Ensure that the riving knife is adjusted so that the

distance between the riving knife and the rim of the

blade is not more than 5mm, and the rim of the blade

does not extend more than 5mm beymond the lowest

edge of the riving knife.

Safety instructions for all saws

DANGER:

■ Keep hands away from cutting area and the blade.

Keep your second hand on auxiliary handle, or

motor housing. If both hands are holding the saw,

they cannot be cut by the blade.

■ Do not reach underneath the workpiece. The

guard cannot protect you from the blade below the

workpiece.

■ Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade teeth

should be visible below the workpiece.

■ Never hold piece being cut in your hands or

across your leg. Secure the workpiece to a stable

platform. It is important to support the work properly

to minimize body exposure, blade binding, or loss of

control.

■ Hold power tool by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a "live" wire will also make exposed

metal parts of the power tool "live" and shock the

operator.

■ When ripping always use a rip fence or straight

edge guide. This improves the accuracy of cut and

reduces the chance of blade binding.

■ Always use blades with correct size and shape

(diamond versus round) of arbour holes. Blades

that do not match the mounting hardware of the saw

will run eccentrically, causing loss of control.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

EWS-1266EWS-1366(EU).qxd 11/24/2004 4:49 PM Page 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi EWS-1366 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info