Bedienungsanleitung Ryobi OSC1800 (Seite 4 von 24) (Englisch)

733429

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

■ Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

■ Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

■ Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

■ Keep handles and grasping surfaces dry, clean,

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

■ Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

■ Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

■ When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

■ Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

■ Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

■ Do not expose a battery pack or tool to fire

or excessive temperature. Exposure to fire or

temperature above 130°C may cause explosion.

■ Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

SERVICE

■ Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

■ Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

CORDLESS SURFACE CLEANER SAFETY

WARNINGS

■ Never allow children, persons with reduced physical,

sensory, or mental capabilities or lack of experience

and knowledge, or people unfamiliar with these

instructions to use the product.

■ Use the product in daylight or with good artificial light.

■ Keep proper footing and balance at all times, and be

sure of proper footing on slopes.

■ Do not walk backwards when using the product.

■ Walk, never run.

■ Keep the head attachment below waist level.

■ Never operate the product with damaged guards or

without the guards in place.

■ Keep hands and feet away from the cleaning means at

all times and especially when switching on the motor.

■ Turn off the product and remove the battery pack. Make

sure that all moving parts have come to a complete

stop:

● before servicing

● before leaving the product unattended

● before clearing a blockage

● before checking, cleaning, and working on the

product

● before changing accessories

● after striking a foreign object

● whenever performing maintenance

● whenever the product starts to vibrate abnormally

■ Wear full eye and hearing protection while using the

product. If working in an area where there is a risk of

falling objects, head protection must be worn.

■ Hearing protection may restrict the operator’s ability

to hear warning sounds. Pay particular attention to

potential hazards around and inside the working area.

■ Always ensure that ventilation openings are kept clear

of debris.

■ Before use and after any impact, check that there are

no damaged parts. A defective switch or any part that is

damaged should be properly repaired or replaced by an

authorised service centre.

■ Do not modify the product in any way. This may

increase the risk of injury to yourself or others.

■ Immediately turn off and remove the battery pack in

the event of accident or breakdown. Do not operate

the product again until it has been fully checked by an

authorised service centre.

■ Always test the product on the material to be cleaned

prior to starting full operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi OSC1800 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info