Bedienungsanleitung Ryobi RPW190BL-G (Seite 10 von 32) (Englisch)

733426

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

USING THE HIGH PRESSURE HOSE

WARNING

Injection hazard. Fully unwrap and

straighten high pressure hose prior to and

during each use and do not allow it to

become kinked. The high pressure hose

features an outer covering that provides

strength to the hose. If the outer covering

becomes damaged, stop using the hose

and replace it immediately. A kinked or

damaged hose can develop a high pressure

leak and result in a possible injection or

other serious personal injury.

To prevent damage to the outer covering,

follow these precautions:

■ Inspect the hose before every use.

■ Fully unwrap and straighten the hose

before use.

■ Do not allow the high-pressure hose to be

kinked.

■ Keep the hose away from hot surfaces and

sharp edges.

■ Do not pull the product by using the high-

pressure hose.

■ Do not allow the hose to be crushed or

wrapped around objects.

WASHING WITH DETERGENT

Use only detergents designed for high

pressure washers. Household detergents,

acids, alkalines, bleaches, solvents,

ammable material, or industrial grade

solutions can damage the pump. Many

detergents may require mixing prior to use.

Prepare the cleaning solution as instructed on

the solution bottle.

NOTE: Spray the detergent on a dry surface

using long, even, overlapping strokes. To

prevent streaking, do not allow detergent to

dry on the surface.

Before turning off the motor

■ Fill the soap tank with clean water.

■ Spray the clear water through the spray

wand until the tank is empty.

■ If any detergent remains in the spray,

repeat with a second tank of clean water.

■ Turn off the motor.

NOTE: Turning off the motor will not relieve

pressure in the system. Pull trigger to release

water pressure.

RINSING WITH THE HIGH PRESSURE

WASHER

■ Turn off the pressure washer and turn off

the water supply. Pull trigger to release

water pressure.

■ Engage the lock out on the trigger handle

by pushing up on the lock out until it clicks

into the slot.

■ Remove the soap nozzle and place it in the

nozzle storage area on the machine.

■ Select the right nozzle for the job. See the

chart shown earlier in the manual to select

the appropriate nozzle.

■ Start at the top of the area to be rinsed and

work down, overlapping the strokes.

POWER CORD STORAGE

When it is not in use, the power cord may be

coiled and suspended from the holder on the

handle.

To secure the power cord in place, use the

attached bungee cord.

MOVING THE PRESSURE WASHER

NOTE: Never lift or carry the product using

the handle and never place it in any position

other than upright on its wheels.

SYMBOLS ON THE PRODUCT

Warning

To reduce the risk of injury,

user must read and understand

operator’s manual before using

this product.

Wear full eye and ear protection.

Remove plug from the mains

immediately if cable is damaged

or cut.

Electrical shock hazard

The product is not suitable

for connection to the drinking

water mains without backow

preventer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi RPW190BL-G Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info