Bedienungsanleitung Ryobi RY18HCA (Seite 4 von 116) (Alle Sprachen)

798986

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

4Original Instructions

■Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

■Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or temperature

above 130°C may cause explosion.

■Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk of

fire.

SERVICE

■Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

■Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorised service providers.

CULTIVATOR SAFETY WARNINGS

■Never carry the product while the product is running.

■Read the instructions carefully. Be familiar with the

controls and the correct use of the product.

■Use the product only in daylight or with good artificial

light.

■Never allow children or people who are unfamiliar with

these instructions to use the product. Local regulations

may restrict the age of the operator.

■Never operate the product while people, especially

children, or pets are nearby. Keep in mind that the

operator or user is responsible for accidents or hazards.

■While operating the product, always wear substantial

footwear and long trousers.

■Thoroughly inspect the area where the product is to be

used and remove all objects which can be thrown by the

product.

■Before each use, always visually inspect to see, that

the housing is undamaged and that guards and handles

are in place and properly secured. Replace worn or

damaged components in sets to preserve balance.

■Keep hands away from the rotating tines at all times and

especially when turning on the product.

■Turn off the product, and remove the battery pack. Make

sure that all moving parts have come to a complete stop:

●before leaving the product unattended

●before cleaning the product or clearing a blockage

●before checking for any damage after hitting an

object

●if the product starts to vibrate abnormally (check

immediately)

●before performing maintenance

■Operate the product only in temperatures between 0°C

and 40°C.

ADDITIONAL BATTERY SAFETY WARNINGS

■To reduce the risk of fire, personal injury, and product

damage due to a short circuit, never immerse the

product, battery pack, or charger in fluid or allow fluid

to flow inside them. Corrosive or conductive fluids, such

as seawater, certain industrial chemicals, and bleach

or bleach-containing products, etc., can cause a short

circuit.

■Charge the battery pack in a location where the ambient

temperature is between 10°C and 38°C.

■Store the battery pack in a location where the ambient

temperature is between 0°C and 20°C.

TRANSPORTATION AND STORAGE

■Allow the product to cool down before storing or

transporting.

■Remove all foreign materials from the product. Store the

product in a cool, dry, and well-ventilated place that is

inaccessible to children. Keep the product away from

corrosive agents, such as garden chemicals and de-

icing salts. Do not store the product outdoors.

■For transportation in a vehicle, secure the product

against movement or falling to prevent injury to persons

or damage to the product.

■Store the product in a location where the ambient

temperature is between -10°C and 50°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with local and

national provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries or

conductive materials while in transport by protecting exposed

connectors with insulating, non-conductive caps or tape.

Do not transport battery packs that are cracked or leaking.

Check with the forwarding company for further advice.

MAINTENANCE

■Use only original manufacturer’s replacement parts,

accessories, and attachments. Failure to do so can cause

possible injury, can contribute to poor performance, and

may void your warranty.

■Servicing requires extreme care and knowledge

and should be performed only by a qualified service

technician. Have the product serviced by an authorised

service centre only.

■Check all nuts, bolts, and screws at frequent intervals

for proper tightness to ensure that the product is in safe

working condition.

KNOW YOUR PRODUCT

See page 83.

1. Tine guard

2. Front handle

3. Speed selector

4. Rear handle

5. Trigger release button

6. Tine guard screws

7. Front handle screws

8. Switch trigger

9. R-clip

10. Blade release cap

11. Pick tine

12. Battery pack

13. Charger

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi RY18HCA Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info