Bedienungsanleitung SAB Heli Division Goblin 770 (Seite 4 von 48) (Englisch)

628373

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Use grease

(eg Tri-Flow

Synthetic Grease)

IMPORTANT NOTES

*This radio controlled helicopter is not a toy.

*This radio controlled helicopter can be very dangerous.

*This radio controlled helicopter is a technically complex device which has to be built and handled very carefully.

*This radio controlled helicopter must be built following these instructions. This manual provides the necessary information

to correctly assemble the model. It is necessary to carefully follow all the instructions.

*Inexperienced pilots must be monitored by expert pilots.

*All operators must wear safety glasses and take appropriate safety precautions.

*A radio controlled helicopter must only be used in open spaces without obstacles, and far enough from people to minimize

the possibility of accidents or of injury to property or persons.

*A radio controlled helicopter can behave in an unexpected manner, causing loss of control of the model, making it very

dangerous.

*Lack of care with assembly or maintenance can result in an unreliable and dangerous model.

Neither SAB Heli Division nor its agents have any control over the assembly, maintenance and use of this product.

Therefore, no responsibility can be traced back to the manufacturer. You hereby agree to release SAB Heli Division from

any responsibility or liability arising from the use of this product.

SAFETY GUIDELINES

*Fly only in areas dedicated to the use of model helicopters.

*Follow all control procedures for the radio frequency system.

*It is necessary that you know your radio system well. Check all functions of the transmitter before every flight.

*The blades of the model rotate at a very high speed; be aware of the danger they pose and the damage they may cause.

*Never fly in the vicinity of other people.

Indicates that for this

assembly phase you need

materials that are in

box xx, bag xx, tray xx.

NOTES FOR ASSEMBLY

lease refer to this manual for assembly instructions for this model.

Follow the order of assembly indicated. The instructions are divided into chapters, which are structured in a way that

each step is based on the work done in the previous step. Changing the order of assembly may result in additional or

unnecessary steps.

Use thread lockers and retaining compounds as indicated. In general, each bolt or screw that engages with a metal part

requires thread lock.

Factory pre-assembled components have been assembled with all the required thread lock and lubricants,

and have passed quality control. It is not necessary to disassemble and re-assemble them.

It is necessary to pay attention to the symbols listed below:

Use grease

(eg Vasellina Grease)

Important

Use retaining

compound

(eg Loctite 648)

Use CA Glue

Use retaining

compound

(eg Loctite 243)

Page 2

Chapter 2, Important Notes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SAB Heli Division Goblin 770 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info