10/100M adaptive Ethernet interface. Through this interface, IPCAM can be connected with various network
devices, such as hub, router, etc.
6) Reset button
Press and hold on the reset button for 5 seconds. Releasing the reset button, the password will back to the
factory default administrator password. The default administrator user is admin with no password.
Bottom View
There are up to three labels located on the body of the camera; this is an important feature of original
cameras. If your camera does not have labels, it may be a clone one. Cloned cameras can not use original
firmware and are not eligible for warranty or technical services.
1.5.SD Card Management
The record files of the IPC can be stored in the SD Card.
This camera supports SD Card and the max size of SD card must be under 32G.
You need open the IP Camera, then plug the SD card into SD card slot inside the IP Camera.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the
SD Card may be cannot work well.
Note:
When you re-install the camera, please ensure the tightness with the camera.
2 Access the IP Camera
This chapter explains how to access the camera through browser and RTSP player.
2.1 Access the Camera in LAN
This camera supports HTTP and HTTPS protocols, you can access the camera by two ways.
(1) http:// LAN IP + HTTP Port NO.
Double click the Equipment Search Tool icon and it should find the camera’s IP address automatically after you
plug in the network cable.
