Bedienungsanleitung SAB Titan (Seite 24 von 40) (Englisch)

485238

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

TV screen flickering. By Native TV means system

will be according to the HDMI TV’s max supported

resolution to set its resolution, if system is not

connected to a HMDI TV, it will set resolution to be

default

 Aspect Mode is for switching the screen aspect

ratio mode. Now we provide below options: 4:3

PS / 4:3 LB / 16:9/Auto. You can press [Left/Right]

key to select each mode circularly. 16:9 will

provide user pillar box mode it means user use

16:9 TV to display but need to see a 4:3 full display

picture. System will force press wide screen

picture to be narrow and there’re black band on

left and right site. Auto means system won’t do

any aspect ration translation, 16:9 picture source

will be good display on a 16:9 TV but will be too

narrow on a 4:3 TV, and 4:3 picture source will be

too wide

in a 16:9 TV but will be good

display in a 4:3 TV.

 Video Output: Press [Left/Right] to select

RGB or CVBS.

 Digital Audio Out is for setting the both SPDIF and

HDMI’s digital audio output mode, it has options

LPCM Out, Auto, You can press [Left/Right] Key to

select each mode circularity. LPCM Out means

system will decode no matter AC3 or PCM audio

track data to be LPCM, digital audio decoder or

HDMI TV will get LPCM digital audio data. Auto

means system will detect which the connected

HDMI TV can decode and then output that data. If

HDMI TV can decode AC3, system just output

RAW data, if HDMI TV can decode LPCM only,

system will just decode AC3 or LPCM to be LPCM

and then output.

 Press [Exit] key to draw back from “TV

System” menu.

11.6 Miscellaneous Settings

When you enter to “Miscellaneous Settings” menu,

you will see a screen like below:

Channel list mode:This item provide below

options: 1/2/3,you can press left or right keyto

select each mode circularly.

2 Subtitle Auto: You can press[Left/Right] key to

select “On” or “Off”.

If the current channel has subtitle information, it

will be showed up automatically while this

function is “ON”, if this function is “OFF”, you

need turn on the subtitle manually by press

[Yellow] key.

3 Auto Power Down: You can pres[Left/Right]

key to select the time or “Off”, if you select time,

duration this time if no any operation on

receiver, it will go to standby mode.

4 Panel Power In Standby: if set to “ON”, the

front panel will display time or some other

information in standby mode; if set to “OFF”, it

will display nothing in standby mode.

5 Loop Control: if set to “ON”, the receiver will

enable SCART LOOP and TUNER LOOP

function, if set to “OFF”, will disable this

function.

6 Standby Mode:you can press left or right keyto

select "fake" Or "real".

11.7 OSD Setting

When you enter the “OSD Setting” menu, you

will see a screen like below:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SAB Titan Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von SAB Titan

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info