Bedienungsanleitung Saba SCB1910VX (Seite 66 von 85) (Englisch, Französisch)

544404

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

English - 64 -

Press “ ” or “ ” button to change the preset. In

equalizer menu, the preset can be changed to Flat,

Classic, User, Music, Movie and Speech.

Select the desired frequency by pressing “

” or “ ”

button and increase or decrease the frequency gain

by pressing “ ” or “ ” button.

Press the “MENU” button to return to the previous

menu.

Note: Equalizer menu settings can be changed only when

the Equalizer Mode is in User.

Balance

This setting is used for emphasizing left or right

speaker balance.

Press “

” or “ ” button to select Balance. Press “

” or “ ” button to change the level of the balance.

Balance level can be adjusted between -32 and +

32.

Headphone

Press “ ” or “ ” button to select Headphone. Press

“ ” button to view the headphone menu.

Headphone sub-menu options are described below:

Volume

Press “ ” or “ ” button to select Volume. Press “

” button to increase headphone volume level. Press

“

” button to decrease headphone volume level.

Headphone volume level can be adjusted between

0 and 63.

Sound Mode

Press “ ” or “ ” button to select Sound Mode. Using

“

” or “ ” button, you can select Mono, Stereo, Dual I

or Dual II mode, only if the selected channel supports

that mode.

AVL

Automatic Volume Limiting (AVL) function adjusts the

sound to obtain xed output level between programmes

(For instance, volume level of advertisements tend to

be louder than programmes).

Press “

” or “ ” button to select AVL. Press “ ” or

“ ” button to set the AVL as On or Off.

Store

Press “ ” or “ ” button to select Store. Press “ ”

or OK button to store the settings. “Stored...” will be

displayed on the screen.

Feature Menu

Sleep Timer

Press “ ” or “ ” button to select Sleep Timer. Use

“ ” or “ ” button to set the Sleep Timer.

The timer can be programmed between Off and 2

hours (120 minutes) in steps of 10 minutes.

If Sleep Timer is activated, at the end of the selected

time, the TV goes automatically to standby mode.

Child Lock

Press “ ” or “ ” button to select Child Lock.

Use “

” or “ ” button to set the Child Lock On or Off.

When On is selected, the TV can only be controlled

by the remote control. In this case the control panel

buttons will not work, except for the Standby/On

button. When Child Lock is activated you are able to

switch the TV into Standby mode with the Standby/

On button. To switch the TV on again, you need the

remote control.

Hence, if one of those buttons is pressed, Child Lock

is On will be displayed on the screen when the menu

screen is not visible.

Language

Press “ ” or “ ” button to select Language. Use “ ”

or “ ” button to select the Language.

Default Zoom

While zoom mode is set as AUTO, the TV will set

the zoom mode in accordance with the signal of

the broadcast. If there is no WSS or aspect ratio

information, the TV will then use this setting to adopt.

Press “ ” or “ ” button to select Default Zoom. You

can set Default Zoom to 16:9, 4:3, Panoramic or

14:9 by pressing “ ” or “ ” button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Saba SCB1910VX Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info