Bedienungsanleitung Sabo 47-EL VARIO (Seite 53 von 91) (Deutsch, Englisch, Holländisch, Französisch)

661041

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

–

before you check, clean or carry out any work on the machine;

– before you eliminate jams or blockages in the ejection channel;

– when you hit a foreign body;

– if the machine starts to vibrate strangely.

• If a foreign object has been encountered or if the machine becomes blocked, e.g. by driving onto an obstacle, a

specialist dealer must check whether parts of the machine have been damaged or deformed. Any necessary repairs

must also be carried out by an authorized specialist workshop.

• If you notice unusually strong vibrations in your machine, you must have it checked by an authorized dealer.

Switch the engine off, and ensure that all moving parts have come to a complete standstill:

– if you have to lift or tilt the lawnmower, e.g. in order to transport it,

– when transporting the machine to and from the lawn

– when moving the machine off the lawn area;

– if the machine is left unattended for a few minutes;

– when adjusting the cutting height;

– before removing the collector bag.

Maintenance and storage

• Ensure that all screws have been tightened securely and that the machine is in a safe working condition.

The ejection flap must only be opened and the grass collector removed when the motor is turned off.

Always check the grass collector at regular intervals for wear and tear or loss of function.

Always check the condition and tightness of the blade prior to mowing. A worn or damaged blade must be

replaced immediately.

Always have the replacement, sharpening or balancing of the blade carried out by an authorised workshop,

since according to the applicable standard DIN EN 60335, an insulation test must always be carried out

following repairs or maintenance work to insulating components (e.g. blade screws).

• For reasons of safety, always replace worn or damaged parts.

Protective gloves must be worn at all times during maintenance and cleaning work.

Maintenance and cleaning work must only be performed when the motor has been switched off and the plug has

been pulled out of the socket.

Do not clean the machine with running water or pressure cleaners. This could damage the electrical system.

For warranty and safety reasons, original replacement parts must be used at all times.

• Notes for Switzerland:

Electric appliances must only be operated if a residual current operated device with a maximum breaking current of 30

mA is also integrated into the circuit.

• Notes for Austria:

The socket coupler of the connecting cable must be splashproof.

6 DESCRIPTION OF COMPONENTS

1 Cable connection plug

2 Variable speed switch

3 Actuating grip for motor (safety grip)

4 Bridge

5 Electric motor

6 Cutting height adjuster

7 Carrying handle front

8 Ejection flap

9 Strain relief device for electric cable

10 Cable guide

11 Drive switch operating lever

12 Locking button (red)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sabo 47-EL VARIO Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info