Bedienungsanleitung Saeco VIA VENEZIA ESPRESSO BLACK SIN006X (Seite 13 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

459485

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

2524

CONTROLS AND MACHINE PARTS - SET UP SETTING UP THE MACHINE AND USE

Controls and machine parts - set up

Water tank

Green “ready” light

Main switch

Filter holder mounting

Coffee button

Steam button

Steam arm

Steam/hot water knob

Drip tray and grill

Cover

Power cord

Water tank funnel

Accessories box

Accessories

Filter holder

Doser

Set-up precautions

Before setting up the machine, heed

the following safety precautions:

• place the machine in a safe place;

• keep children away from the

machine;

• do not place the machine on hot

surfaces or near open flames.

The machine is now ready to be set up.

Connection to the Power Supply

Electrical current can be dangerous,

therefore the safety precautions must be

rigorously respected.

he espresso machine should be

plugged into a suitable electrical

outlet only.

Make sure the power of the

electrical outlet corresponds to

the power indicated on the rating plate

of the machine.

Never use defective power cords

or plugs. Defective parts must be

replaced immediately by authorized

service personnel.

Warning! If an extension cord is used,

make sure that it has a minimum diameter

of 1 mm² and that it has a three-pole

outlet/ plug.

The voltage of the machine has been set

during production at the factory. Make

sure that the voltage of the power mains

corresponds to that on the rating plate

underneath the machine.

Make sure that the main switch (3) is in

the “0” position before plugging the

machine into the electrical outlet.

Packaging

The original box and packing materials

have been constructed specifically to

protect the machine during shipping. It is

recommended to keep the box and

packing materials for future shipping.

For your own safety and that of

others, carefully heed all safety

precautions indicated on pages 22 and 23.

Filling water tank

• Remove the drip tray (9) and accesso-

ries box (13).

Remove the water tank by pulling it

our from the front of the machine.

Rinse the tank and fill it with fresh

water. Avoid overfilling the tank.

Replace the water tank. Make sure

the water tube hangs straight into the tank.

Do not bend the tube.

• Replace the drip tray (9) and accesso-

ries box (13).

The water tank also can be filled without

removing the tank.

Simply pour water into the water tank fun-

nel (12).

Always fill water tank only with

fresh, non-sparkling water. Never

fill with hot water or other liquids that could

damage the tank.

Never use the machine without

water. Before turning the machine

on, always make sure that the water tank

is filled.

Priming the system

Before the first use of the machine, after a

prolonged period without use, whenever

the water tank has run completely dry, or

after drawing steam the system must be

primed.

Direct the steam arm on the drip tray.

Open the steam/hot water knob (8) until a

steady stream of water is dispensed. Close

the knob. Insert the filter holder (G) into the

brew head (4) to pre-heat the filter holder.

The machine is now ready to dispense

coffee.

Brewing espresso

Press the main switch (3) and wait for the

green light (2) to come on. This indicates

that the machine has reached the proper

temperature.

Put 1 or 2 doses of ground coffee in

the filter, without pressing it, in order to

obtain 1 or 2 espresso servings.

With the special “Crema” (G) filter holder

supplied with the machine it is not

necessary to change the filter for one or

two servings.

Insert the filter holder into the brew

head, turning from left to right until it locks

into place.

Release the handle of the filter holder.

The filter holder will automatically move

slightly to the left.

This movement guaran-tees the perfect

operation of the filter holder.

Place the one or two cups on the drip

tray (9) below the filter holder ensuring that

they are correctly positioned under the

coffee spouts.

Make sure that the green “ready” light (2)

is on then press the coffee button (5).

When the cups contain the desired

amount of coffee, press the coffee button

(5) to stop the dispensing.

Wait a few seconds, then remove the filter

holder and empty the used grounds.

Cleaning hint: keep the filter of the filter

holder clean by removing it and washing

it with water.

Choosing the quality of the coffee

As a general rule all types of coffee on the

market can be used, however, since cof-

fee is a natural product and its flavor chan-

ges according to its origin and blend, it is

advisable to try different types in order to

find the one that best suits your personal

tastes.

For the best results we recommend using

a blend which is specifically prepared for

espresso machines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Saeco VIA VENEZIA ESPRESSO BLACK SIN006X Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info